SR10-0.050-1%

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistors that are used to control the amount of current in a circuit. SR10-0.050-1% is a through hole resistor that is particularly useful in high frequency applications. This type of resistor has many useful features, including its low resistance and high frequency performance, and is often found in applications such as radio transmitters and receivers, signal level measurement, and more.

One of the most important characteristics of SR10-0.050-1% is its low resistance. This type of resistor typically has a resistance of around 0.050 ohms, which is much lower than most other resistors. This low resistance means that the resistor can handle a high level of current without the risk of damage or overheating. Furthermore, the low resistance allows it to operate at high frequencies, making it well suited for applications such as radio transmitters and receivers.

The working principle of SR10-0.050-1% is based on Ohm’s law. This law states that the current through a conductor is proportional to the potential difference across it, and that the resistance between two points is equal to the ratio of the potential difference across those two points. Therefore, when a current is applied to the resistor, it will produce a resistance equal to the ratio of the potential difference across the two points. This resistance will then control the amount of current that can flow through the resistor.

In addition to controlling current, SR10-0.050-1% has a number of other useful features. It has a low tolerance level, meaning that it can be used for applications that require precise amounts of current to be delivered. Furthermore, it has good thermal stability and shock resistance, meaning that it can be used in rugged environments. This makes it ideal for use in radio transmitters and receivers, signal level measurement, and other applications where precision and reliability are paramount.

SR10-0.050-1% is a through hole resistor that can be used in many different applications. It has a low resistance and a high frequency performance, making it ideal for use in radio transmitters and receivers, signal level measurement, and other applications. Its low tolerance level and good thermal stability and shock resistance make it suitable for applications in harsh environments. All of these features make SR10-0.050-1% a valuable and versatile component for any electronics project.

The specific data is subject to PDF, and the above content is for reference