SS23 M4G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	30V
Current - Average Rectified (Io):	2A
Voltage - Forward (Vf) (Max) @ If:	500mV @ 2A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	400µA @ 30V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	DO-214AA, SMB
Supplier Device Package:	DO-214AA (SMB)
Operating Temperature - Junction:	-55°C ~ 125°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SS23 M4G Diodes - Rectifiers - Single

The SS23 M4G diodes - rectifiers - single is an electric component used to protect DC circuits from voltage spikes caused by inductive loads. It is a type of diode that is known as a series-droop protector, because it is designed to limit the voltage in a series circuit to a predetermined value.The SS23 M4G protects electric circuits by limiting the current flow through it and preventing it from exceeding the pre-set voltage. This diode is designed to provide a low impedance path for resisting surges generated by inductive loads and short-circuits. It also prevents reverse current flow and arcing across contacts.It is used in various applications, including motor drives, power distributors, and computer systems. In these applications, the SS23 M4G is placed in series with the electrical load in order to protect it from high voltage currents. While the device does not provide protection against overvoltage, it does help to reduce the risk of damage occurring to other components of the circuit.The SS23 M4G is available in both three-pin and four-pin versions and is able to withstand a continuous output current of up to 8 amperes. The diode is made of a silicon substrate and is typically rated for voltage between 15V to 30V. Its power dissipation capacity is 0.3 W, with a maximum junction temperature of 95 oC. The device has an operating temperature range of -55 oC to +125 oC.The working principle of the SS23 M4G is based on its connection to an inductive load. When a pulse of current is applied to the load it begins to produce a waveform whose frequency can be adjusted by altering the resistance or capacitance of the circuit. The waveform\'s amplitude will increase with the amount of current applied to the load and the waveform takes on a sinusoidal shape.When a diode is connected to the output of this waveform, the diode will begin to block the waveform\'s rising half cycle and will remain in its reverse-biased state for the duration of the wave\'s full half cycle. This, in turn, causes the voltage wave to be significantly reduced and, as a result, the voltage spike that could otherwise occur is prevented from affecting the circuit.The SS23 M4G is an important electric component for the protection of sensitive electric circuits and is available with a wide range of power ratings, making it a suitable choice for many applications. It is able to protect circuits from high voltage currents, reduce the risk of damage from surges, and prevent arcing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description