SSCMANN001BDSA5

Series:	TruStability® SSC
Part Status:	Active
Pressure Type:	Differential
Operating Pressure:	±14.5 PSI (±100 kPa)
Output Type:	SPI
Output:	12 b
Accuracy:	±0.25%
Voltage - Supply:	4.75 V ~ 5.25 V
Port Size:	Male - 0.19" (4.93mm) Tube
Port Style:	Barbed
Features:	Amplified Output, Temperature Compensated
Termination Style:	Surface Mount
Maximum Pressure:	±58.02 PSI (±400 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	8-SMD, J-Lead, Top Port
Supplier Device Package:	8-SMT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Pressure sensors and transducers are important tools used in process control and automation systems. They can measure the pressure of gases, liquids and other media. A pressure transducer is an electronic instrument that converts a pressure signal into an electrical signal that can be read, measured and recorded by a data acquisition system. The SSCMANN001BDSA5 is a pressure sensor that is designed for high accuracy measurement of pressure for industrial applications. This article will discuss the application field and working principle of SSCMANN001BDSA5.

Application Field of SSCMANN001BDSA5

The SSCMANN001BDSA5 is designed for industrial applications such as pumps, compressors and safety valves. It is suitable for use in hazardous areas where intrinsic safety is required. It is also suitable for use in extreme temperature conditions. The sensor is designed for high accuracy measurements up to ±5% full scale accuracy. It can measure pressure up to 20 bar and has a 0 - 5V output.

Working Principle of SSCMANN001BDSA5

The SSCMANN001BDSA5 pressure sensor works on the principle of differential pressure measurement. A pressure-sensing diaphragm is used to measure the static pressure of the medium. The diaphragm is connected to a piezoresistive bridge with two strain gauges on each side that measure the pressure. A differential amplifier is used to compare the pressure being measured and a reference voltage, and a signal amplifier is used to convert the resulting voltage into a 0 - 5V output signal.

Conclusion

The SSCMANN001BDSA5 is a pressure sensor designed for use in industrial applications. It is a differential pressure sensor that works on the principle of pressure-sensing diaphragm and piezoresistive bridge. This pressure sensor is suitable for use in hazardous areas and extreme temperature conditions. It has high accuracy measurements up to ±5% full scale and has a 0 - 5V output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description