SSCMRRN016MGAA3

Series:	TruStability® SSC
Part Status:	Active
Pressure Type:	Vented Gauge
Operating Pressure:	0.23 PSI (1.6 kPa)
Output Type:	Analog Voltage
Output:	0.33 V ~ 2.97 V
Accuracy:	±0.25%
Voltage - Supply:	3.27 V ~ 3.33 V
Port Size:	Male - 0.08" (1.93mm) Tube, Dual
Port Style:	Barbed
Features:	Amplified Output, Temperature Compensated
Termination Style:	Surface Mount
Maximum Pressure:	9.79 PSI (67.5 kPa)
Operating Temperature:	-40°C ~ 85°C
Package / Case:	8-SMD, J-Lead, Dual Ports, Same Side
Supplier Device Package:	8-SMT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SSCMRRN016MGAA3

The SSCMRRN016MGAA3 is a high performance pressure sensor and transducer manufactured by Cool And Green GmbH. It is a low-cost, fully integrated single-chip application specific integrated circuit (ASIC) solution. The sensor and transducer features a pre-programmed resistance temperature sensor, an integrated pressure sensor, an input stage, a temperature-compensated differential amplifier, and an adjustable threshold detection point.

Application Field of SSCMRRN016MGAA3

The SSCMRRN016MGAA3 pressure sensor and transducer are widely used in temperature and pressure measurement, industrial control, water quality monitoring, aviation, military, automotive, and medical applications. In particular, this pressure sensor and transducer are commonly used in pressure monitoring and control systems, such as those used in pressure relief valves, high and low pressure lines, and other industrial control systems. In pressure monitoring and control systems, the SSCMRRN016MGAA3 is used to detect and control the pressure levels within a system. This pressure sensor and transducer can detect pressure levels from 0 - 17.5MPa. Its high accuracy and repeatability make it ideal for industrial process monitoring and control applications.

How Does SSCMRRN016MGAA3 Pressure Sensor and Transducer Work?

The SSCMRRN016MGAA3 pressure sensor and transducer operate according to the differential capacitive principle. This principle operates on the following guidelines: When a pressure is measured, the capacitance between the two sides of the sensing element will change. The capacitance between the two sides of the element is directly proportional to the pressure applied. When the pressure applied is low, the capacitance between the two sides will be low and vice versa. Using this principle, the SSCMRRN016MGAA3 is able to detect changes in pressure levels over a wide range of applications and environments. The sensing element within the pressure sensor and transducer contains a differential capacitor which is sensitive to changes in pressure. This capacitor is connected to a Wheatstone bridge circuit, which amplifies the differential capacitance signals into voltage signals, which can then be fed to an output circuit. The differential capacitance signals from the sensing element are then amplified and converted into digital output signals by the integrated amplifier. The output can then be used for various control and monitoring purposes.

Summary

The SSCMRRN016MGAA3 is a pressure sensor and transducer designed for a range of industrial applications. It uses the differential capacitive principle to detect and control changes in pressure levels over a wide range of applications and environments. The sensor is accurate and repeatable and therefore makes it ideal for industrial process monitoring and control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description