| Allicdata Part #: | 497-6922-2-ND |
| Manufacturer Part#: |
STG6384QTR |
| Price: | $ 0.00 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | STMicroelectronics |
| Short Description: | IC SWITCH DUAL SPST 10QFN |
| More Detail: | 2 Circuit IC Switch 1:1 1.3 Ohm 10-QFN (1.8x1.4) |
| DataSheet: |  STG6384QTR Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Switch Time (Ton, Toff) (Max): | 55ns, 30ns |
| Base Part Number: | STG5684 |
| Supplier Device Package: | 10-QFN (1.8x1.4) |
| Package / Case: | 10-UFQFN |
| Operating Temperature: | -40°C ~ 85°C (TA) |
| Crosstalk: | -85dB @ 1MHz |
| Current - Leakage (IS(off)) (Max): | 100nA |
| Channel Capacitance (CS(off), CD(off)): | 85pF |
| Charge Injection: | 49pC |
| -3db Bandwidth: | 65MHz |
| Series: | -- |
| Voltage - Supply, Dual (V±): | -- |
| Voltage - Supply, Single (V+): | 1.65 V ~ 4.3 V |
| Channel-to-Channel Matching (ΔRon): | 10 mOhm |
| On-State Resistance (Max): | 1.3 Ohm |
| Number of Circuits: | 2 |
| Multiplexer/Demultiplexer Circuit: | 1:1 |
| Switch Circuit: | SPST - NO |
| Part Status: | Obsolete |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Interface - Analog Switches, Multiplexers, Demultiplexers
The STG6384QTR is an integrated control system which has been designed to control analog switches, multiplexers and demultiplexers. It is a 4-digit hexadecimal display that uses a microcontroller to control and read analog switches. The display contains the following four components: Clock, Timer, Input, and Output.
The Clock is the main component of the STG6384QTR, it is used to measure the time of analog signals. The Timer is used for counting digital signals, allowing for precise timing. The Input is used for digital signal processing and the Output is used to drive or control the analog switches.
The STG6384QTR can be used in the following two ways:
- Single-Input Mode: In this mode, the STG6384QTR will take a single analog signal as its input. The signal is then processed and the results are displayed in hexadecimal form on the display.
- Dual-Input Mode: In this mode, two analog signals are taken as inputs and compared against each other. The difference between the signals is then displayed in hexadecimal form on the display.
It is possible to configure the STG6384QTR to work with digital signals as well by using the “Double Digital Input Mode”. In this mode, two digital signals are taken as inputs and their differences are then displayed on the display.
The STG6384QTR has the capability to control and read Multiplexers, Analog Switches, and Demultiplexers. In multiplexing applications, the STG6384QTR can be used to select between two or more analog signals. It can also be used to switch between two or more digital signals. In analog switch applications, the STG6384QTR can be used to toggle between two or more analog signals. Finally, it can be used to control and read demultiplexers.
Overall, the STG6384QTR is a versatile integrated control system which can be used in a variety of applications. Its ability to control and read multiplexers, analog switches, and demultiplexers makes it a great choice for applications that require precise control over analog signals.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| STG6384QTR | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL SPST 10QFN... |
| STG6684QTR | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL SPDT 10QFN... |
IC SWITCH SPST 8MSOP1 Circuit IC Switch ...
IC ANALOG SWITCHCircuit IC Switch
IC SWITCH SPDT 8MSOP1 Circuit IC Switch ...
IC SWITCH QUAD SPST 16SOIC4 Circuit IC S...
IC SWITCH QUAD SPDT 20SOIC1 Circuit IC S...
IC SWITCH QUAD SPST 16SOIC4 Circuit IC S...