STM32F100C8T6B

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

The STM32F100C8T6B microcontroller includes a high-performance ARM® Cortex®-M3 32-bit RISC core running at 24 MHz, high-speed embedded memory (up to 128 KB Flash and up to 8 KB SRAM), and a wide range of enhanced peripherals and I/O Connects to two APB buses. All devices offer standard communication interfaces (up to two I2Cs, two SPIs, one HDMI CEC, and up to three USARTs), one 12-bit ADC, two 12-bit DACs, up to six general-purpose 16-bit timers, and advanced control pulses wide modulation timer. The STM32F100C8T6B low- and medium-density devices operate in the –40 to +85 °C and –40 to +105 °C temperature ranges from a 2.0 to 3.6 V supply. A comprehensive set of power-saving modes allows the design of low-power applications. These microcontrollers include devices in three different packages ranging from 48 to 100 pins. Depending on the selected device, different sets of peripherals are included.

2. Feature

    1. Core: ARM® 32-bit Cortex®-M3 CPU

        – 24 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) Performance

        – Single-cycle multiply and hardware divide

    2. Memories

        – 16 to 128 KB of flash memory

        – 4 to 8 KB of SRAM

    3. Clock, reset and power management

        – 2.0 to 3.6 V application power and I/O

        – POR, PDR and Programmable Voltage Detector (PVD)

        – 4 to 24 MHz crystal oscillator

        – Internal 8 MHz factory trimmed RC

        – Internal 40 kHz RC

        – PLL for CPU clock

        – 32 kHz oscillator for RTC with calibration

    4. low power

        – Sleep, stop and standby modes

        – Provides VBAT for RTC and backup registers

    5. Debug mode

        – Serial Wire Debug (SWD) and JTAG interfaces

    6. direct access

        – 7-channel DMA controller

        – Supported peripherals: timers, ADC, SPI, I2C, USART and DAC

    7. 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)

        – Conversion range: 0 to 3.6 V

        – temperature sensor

    8. 2 × 12-bit D/A converters

    9. Up to 80 fast I/O ports

        – 37/51/80 I/Os, all mappable to 16 external interrupt vectors, nearly all 5 V tolerant

  10. Up to 12 timers

        – Up to three 16-bit timers with up to 4 IC/OC/PWM or pulse counters each

        – 16-Bit, 6-Channel Advanced Control Timer: Up to 6 Channels for PWM Output, Dead-Time Generation, and Emergency Stop

        – One 16-bit timer with 2 IC/OC, 1 OCN/PWM, dead time generation and emergency stop

        – Two 16-bit timers each with I2C/OC/OCN/PWM, dead-time generation and emergency stop

        – 2 watchdog timers (independent and windowed)

        – SysTick timer: 24-bit down counter

        – Two 16-bit base timers to drive DACs

  11. Up to 8 communication interfaces

        – Up to two I2C interfaces (SMBus/PMBus)

        – Up to 3 USARTs (ISO 7816 interface, LIN, IrDA function, modem control)

        – Up to 2 SPIs (12 Mbit/s)

        – Consumer Electronics Control (CEC) interface

  12. CRC calculation unit, 96-bit unique ID

  13. ECOPACK® packaging

3. Application

    1. Controls and User Interface

    2. the medical

    3. Handheld devices

    4. PC and Gaming Peripherals

    5. GPS platform

    6. industrial application

    7. Programmable Controllers

    8. inverter

    9. printer

  10. scanner

  11. alarm system

  12. Video intercom and HVAC.