STM32F429VGT6TR

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

STM32F427xx and STM32F429VGT6TR devices are based on high-performance Arm® Cortex®-M4 32-bit RISC core, operating frequency up to 180 MHz. Cortex-M4 The core has a floating-point unit (FPU) single-precision and supports all Arm® single-precision data processing instructions and data types. It also implements a full set of DSP Instructions and memory protection unit (MPU) to enhance application security. STM32F427xx and STM32F429xx devices integrate high-speed embedded Memory (Flash up to 2 MB, up to 256 KB of SRAM), up to 4 KB of Backup SRAM, and a wide range of enhanced I/O and peripherals connected to two APB bus, two AHB buses and a 32-bit multi-AHB bus matrix. All devices provide three 12-bit ADCs, two DACs, one low-power RTC, twelve general-purpose 16-bit timers, including two PWM timers for motor control, and two general-purpose 32-bit timers. They also have standard and advanced communication interfaces.

    1. Up to three I2C

    2. Six SPI, two I2S full duplex. In order to achieve the accuracy of the audio level, the I2S peripheral can The clock is provided by a dedicated internal audio PLL or external clock to allow Synchronize.

    3. Four USARTs plus four UARTs

    4. One full-speed USB OTG and one full-speed USB OTG high-speed (with ULPI),

    5. Two CAN

    6. 1 SAI serial audio interface

    7. One SDIO/MMC interface

    8. Ethernet and camera interface

    9. LCD-TFT display controller

  10. Chrom-ART Accelerator™.

Advanced peripherals include an SDIO, a flexible memory control (FMC) interface, a Camera interface for CMOS sensor. Reference table 2: STM32F427xx and STM32F429xx The function and peripheral count of the peripheral device list available on each part number. STM32F427xx and STM32F429xx devices operate at temperatures from –40 to +105 °C The range is from 1.7 to 3.6 V power supply. When using an external power monitor, the power supply voltage can be reduced to 1.7 V. A comprehensive set of power saving modes Allows the design of low-power applications. STM32F427xx and STM32F429xx devices are available in 8 packages, including 100 stitches to 216 stitches. The included peripheral device group varies with the selected device.

2. Features

    1. Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

    2. Memories

        – Up to 2 MB of Flash memory organized into two banks allowing read-while-write

        – Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM

        – Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, Compact Flash/NOR/NAND memories

    3. LCD parallel interface, 8080/6800 modes

    4. LCD-TFT controller with fully programmable resolution (total width up to 4096 pixels, total height up to 2048 lines and pixel clock up to 83 MHz)

    5. Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)

    6. Clock, reset and supply management

        – 1.7 V to 3.6 V application supply and I/Os

        – POR, PDR, PVD and BOR

        – 4-to-26 MHz crystal oscillator

        – Internal 16 MHz factory-trimmed RC (1% accuracy)

        – 32 kHz oscillator for RTC with calibration

        – Internal 32 kHz RC with calibration

    7. Low power

        – Sleep, Stop and Standby modes

        – VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

    8. 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode

    9. 2×12-bit D/A converters

  10. General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

  11. Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

  12. Debug mode

        – SWD & JTAG interfaces

        – Cortex-M4 Trace Macrocell™

  13. Up to 168 I/O ports with interrupt capability

        – Up to 164 fast I/Os up to 90 MHz

        – Up to 166 5 V-tolerant I/Os

  14. Up to 21 communication interfaces 

        – Up to 3 × I2C interfaces (SMBus/PMBus)

        – Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)

        – Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock

        – 1 x SAI (serial audio interface)

        – 2 × CAN (2.0B Active) and SDIO interface

  15. Advanced connectivity

        – USB 2.0 full-speed device/host/OTG controller with on-chip PHY

        – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

        – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

  16. 8- to 14-bit parallel camera interface up to 54 Mbytes/s

  17. True random number generator

  18. CRC calculation unit

  19. RTC: subsecond accuracy, hardware calendar

  20. 96-bit unique ID

3. Application

    1. Motor drive and application control

    2. Medical equipment

    3. Industrial applications: PLC, inverter, circuit breaker

    4. Printers and scanners

    5. Alarm system, video intercom and HVAC

    6. Home audio equipment shows a general block diagram of the equipment series

4. Pin configuration