STM8L151G6U7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The STM8L151G6U7 is a low power 8-bit microcontroller from the STM8L family of controllers designed for use in a variety of embedded applications. The STM8L151G6U7 has a high level of integration, including a 32 kHz oscillator, 256 bytes of RAM, 2048 bytes of one-time programmable non-volatile flash memory, four timers and eight communication interfaces. This combination of features allows the device to be used in applications such as medical monitoring, home appliances, automotive diagnostic systems, smart meters and consumer electronics.

The STM8L151G6U7 features an advanced 8-bit 50 MHz CPU with Harvard architecture, which allows it to achieve performance gains over other 8-bit processors by running instructions in parallel. The CPU is also clocked by an internal oscillator, allowing the STM8L151G6U7 to operate without the need for an external clock source. The STM8L151G6U7 also features a high speed boot time of approximately 2.3 seconds, making it ideal for time-critical applications.

The STM8L151G6U7 has two expansion interfaces: the Serial Peripheral Interface (SPI) and the Serial Synchronous Interface (SSI). The SPI is a synchronous serial data transfer protocol which operates in either four-wire or three-wire configurations. The SSI is an asynchronous serial data transfer protocol which operates in both two-wire and four-wire configurations. Both interfaces allow for high speed data transfer between the microcontroller and external devices, such as sensors and memory, and are commonly used in embedded applications. These interfaces can be used to connect to external devices, such as a temperature sensor, or to exchange data between different microcontrollers.

The STM8L151G6U7 provides a wide range of powerful peripherals, allowing the device to be used in many applications. The device features four 16-bit timer/counters and three 8-bit timer/counters, as well as a watchdog timer, providing ample timekeeping capabilities to suit many applications. The STM8L151G6U7 also includes analog-to-digital converters, allowing the controller to interface with analog sensors or other analog components. The device also has a set of communications interfaces, allowing it to easily interface with other devices, such as a PC, an ethernet network, or an external memory device.

The STM8L151G6U7 also offers a wide range of power saving and low power operation modes, enabling designs to be optimized for low power operation with minimal compromise on performance. The STM8L151G6U7 can be operated from 1.8V to 3.6V, and includes ultra low power sleep and stop modes, allowing the device to consume less than 0.5uA when in standby mode.

In conclusion, the STM8L151G6U7 is an ideal choice for a wide variety of embedded applications. Its advanced 8-bit 50 MHz CPU with Harvard architecture enables it to achieve high performance, while its wide range of powerful peripherals, combined with the ability to operate from 1.8V to 3.6V, enable an application to be optimized for low power operation and minimal compromise on performance.

The specific data is subject to PDF, and the above content is for reference