STM8S005C6T6

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Describe

STM8S005C6T6 Value Series 8-bit microcontrollers provide 32 KB of flash program memory and 128 bytes of data EEPROM. They are called medium-density devices in the STM8S microcontroller family reference manual (RM0016). All devices in the STM8S005C6/K6 value series have the following advantages: performance, robustness, reduced system costs and shortened development cycles. Real data EEPROM that supports up to 100,000 write/erase cycles, advanced cores and peripherals manufactured with advanced technology at a clock frequency of 16 MHz, powerful I/O, and independent watchdogs with independent clocks ensure device performance and Robustness source and clock security system. Due to the high system integration with internal clock oscillator, watchdog and power-down reset, the system cost can be reduced. The general product family architecture with compatible pins, memory mapping, and modular peripherals allows application scalability and shortens the development cycle. All products operate with a power supply voltage of 2.95 V to 5.5 V. Provide complete documentation and a variety of development tools.

2. Core

    1. Maximum fCPU: 16 MHz

    2. With Harvard's advanced STM8 core Architecture and three-stage pipeline

    3. Extended instruction set

3. Memories

    1. Medium density flash memory/EEPROM

        – Program memory: 32 KB flash memory Memory; data retained for 20 years at 55 °C After 100 cycles

        – Data memory: 128 bytes of real data Read only memory; endurance up to 100 k Write/erase cycle

    2. RAM: 2 KB

4. Clock, reset and power management

    1. 2.95 V to 5.5 operating voltage

    2. Flexible clock control, 4 main clock sources

        – Low-power crystal resonator oscillator

        – External clock input

        – Internal, user-adjustable 16 MHz RC

        – Internal low power consumption 128 kHz RC

    3. Clock security system with clock monitor

    4. Energy management

        - Low power consumption mode (waiting, active stop, stop)

        - Separately turn off the peripheral clock

        - Permanently active, low consumption Power-on and power-down reset

5. Interrupt management

    1. Nested interrupt controller with 32 interrupts

    2. Up to 37 external interrupts on 6 vectors

6. Timer

    1. 2 16-bit general-purpose timers with 2+3 CAPCOM channel (IC, OC or PWM)

    2. Advanced control timer: 16 bits, 4 CAPCOM Channels, 3 complementary outputs, dead time Plug-in and flexible synchronization

    3. 8-bit basic timer with 8-bit prescaler

    4. Automatic wake-up timer

    5. Window and independent watchdog timer

7. Communication interface

    1. UART synchronization with clock output Operation, smart card, IrDA, LIN

    2. Up to 8 Mbit/s SPI interface

    3. I2C interface up to 400 Kbit/s

8. Analog-to-digital converter (ADC)

    1. 10-bit ADC, ± 1 LSB ADC, up to 10 Multiplexed channels, scan mode and analog Watchdog

9. Input/Output

    1. Up to 38 I/Os on a 48-pin package, including 16 High sink output

    2. Highly robust I/O design, not affected by Current injection

10. Development Support

    1. Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging

11. Pin configuration

12. Pin description