STM8S005K6T6C

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Description

The STM8S005K6T6C value line 8-bit microcontrollers offer 32 Kbytes of Flash program memory, plus 128 bytes of data EEPROM. They are referred to as medium-density devices in the STM8S microcontroller family reference manual (RM0016). All devices of STM8S005C6/K6 value line provide the following benefits:performance, robustness, reduced system cost and short development cycles. Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset. The common family product architecture with compatible pinout, memory map and modular peripherals allow application scalability and reduced development cycles. All products operate from a 2.95 V to 5.5 V supply voltage. Full documentation is offered as well as a wide choice of development tools.

2. Features

    1. Core

        - Max fCPU: 16 MHz

        - Advanced STM8 core with Harvard architecture and 3-stage pipeline

        - Extended instruction set

    2. Memories

        1. Medium-density Flash/EEPROM

            – Program memory: 32 Kbytes of Flash memory; data retention 20 years at 55 °C after 100 cycles

            – Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles

        2. RAM: 2 Kbytes

    3. Clock, reset and supply management

        1. 2.95 V to 5.5 operating voltage

        2. Flexible clock control, 4 master clock sources

            – Low-power crystal resonator oscillator

            – External clock input

            – Internal, user-trimmable 16 MHz RC

            – Internal low-power 128 kHz RC

        3. Clock security system with clock monitor

        4. Power management

            – Low-power modes (wait, active-halt, halt)

            – Switch-off peripheral clocks individually

            – Permanently active, low-consumption power-on and power-down reset

    4. Interrupt management

        - Nested interrupt controller with 32 interrupts

        - Up to 37 external interrupts on 6 vectors

    5. Timers

        - 2x 16-bit general purpose timers, with 2+3 CAPCOM channels 

        - Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

        - 8-bit basic timer with 8-bit prescaler

        - Auto wakeup timer

        - Window and independent watchdog timers

    6. Communications interfaces

        - UART with clock output for synchronous operation, SmartCard, IrDA, LIN

        - SPI interface up to 8 Mbit/s

        - I2C interface up to 400 Kbit/s

    7. Analog to digital converter (ADC)

        - 10-bit ADC, ± 1 LSB ADC with up to 10 multiplexed channels, scan mode and analog watchdog

    8. I/Os

        - Up to 38 I/Os on a 48-pin package including 16 high-sink outputs

        - Highly robust I/O design, immune against current injection

    9. Development support

        - Embedded single-wire interface module (SWIM) for fast on-chip programming and nonintrusive debugging

3. Pin configuration