Allicdata Part #: | SUF1000-ND |
Manufacturer Part#: |
SUF1000 |
Price: | $ 49.53 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC MMIC PHEMT AMP DIE |
More Detail: | RF Amplifier IC 0Hz ~ 20GHz Die |
DataSheet: | SUF1000 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 45.02420 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 20GHz |
P1dB: | 14dBm |
Gain: | 10.5dB |
Noise Figure: | 5dB |
RF Type: | -- |
Voltage - Supply: | 5V |
Current - Supply: | 46mA |
Test Frequency: | -- |
Package / Case: | Die |
Supplier Device Package: | Die |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Amplifiers
RF amplifiers are key components in radio communication, satellite transmission, and radar systems due to their need for high power and efficiency. They are governed by a particular set of design rules for optimal performance, and are known as the SUF1000 application field and working principle.
The SUF1000 Application Field
The main application field of the SUF1000 RF amplifier is the communication and radar system. It is designed to support multiple simultaneous high-power transmissions with substantial power efficiency. This is achieved by its multiple power combinations for using two power supplies or an alternating frequency power supply in combination with a constant voltage supply to achieve optimal performance.
In terms of residential usage, the amplifier is used in the short-range telephone communication market. It is also used for enabling wireless apps such as Bluetooth and Wi-Fi due to its high degree of power efficiency. It can work during extreme conditions with its large operating temperature range, high linearity, and high gain.
Working Principle
The SUF1000 is based on loop gain control principle to achieve its high power efficiency. It uses complementary MOS transistors in a common-source configuration to increase the gain. It also introduces efficiency control by means of a linear-switched gain control circuit. The linear-switched gain control circuit contains an automatic gain control (AGC) loop which ensures that the transistor achieves optimal efficiency for a given output power.
The SUF1000 RF amplifier is designed to operate in linear mode, which enables the transistor to produce high linearity, low distortion, and low noise. The output power can be controlled to adjust the distortion levels. The output power level and feedback control circuit also helps to reduce output mismatch and thermal runaway.
Conclusion
The SUF1000 RF amplifier is an efficient and powerful amplifier which is suitable for a range of applications in the communication and radar domain. Its high power efficiency and linear mode of operation make it especially suitable for a variety of residential applications. Its loop gain control principle, linear-switched gain control circuit, and feedback control circuit ensure optimal performance and minimal thermal runaway.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SUF15G-E3/73 | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 400V 1.5A ... |
SUF15J-E3/73 | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 600V 1.5A ... |
SUF1000 | RFMD | 49.53 $ | 1000 | IC MMIC PHEMT AMP DIERF A... |
SUF15G-E3/54 | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 400V 1.5A ... |
SUF15J-E3/54 | Vishay Semic... | 0.0 $ | 1000 | DIODE GEN PURP 600V 1.5A ... |
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...