Allicdata Part #: | 287-1069-ND |
Manufacturer Part#: |
SX05GD2 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Honeywell Sensing and Productivity Solutions |
Short Description: | SENSOR HI-IMP 5PSIG DIP PKG |
More Detail: | Pressure Sensor 5 PSI (34.47 kPa) Vented Gauge Mal... |
DataSheet: | SX05GD2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Pressure Type: | Vented Gauge |
Operating Pressure: | 5 PSI (34.47 kPa) |
Output Type: | Wheatstone Bridge |
Output: | 0 mV ~ 75 mV (5V) |
Accuracy: | ±0.5% |
Voltage - Supply: | 12V |
Port Size: | Male - 0.11" (2.67mm) Tube |
Port Style: | Barbless |
Features: | -- |
Termination Style: | -- |
Maximum Pressure: | 20 PSI (137.9 kPa) |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 6-DIP Module |
Supplier Device Package: | 6-DIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Pressure sensors, transducers, and switches are interface devices used to measure pressure. The SX05GD2 is a pressure sensor device specifically designed for measuring pressure in a wide range of applications. It features a five-terminal integrated circuit, which is sealed in a Vacuum-Compatible plastic package. This device is capable of measuring pressure up to 25 mbar and has a temperature stability of +/- 0.50 %. The SX05GD2 is a highly reliable, low cost, and miniature pressure detector.
The SX05GD2 is suitable for use in multiple industrial, consumer, and medical applications. It can be used as a pressure sensor for monitoring fluid levels in industrial systems. It can also be used in sensing various process parameters, including temperature and pressure in industrial applications. It is also used in automotive pressure monitoring systems, for monitoring brake pressure and engine system pressure. Additionally, it is also used in medical equipment, for measuring pressure during medical procedures such as blood pressure and cardiac monitoring.
The working principle of the SX05GD2 is based on thermal sensing. It uses a silicon diaphragm, which is clamped between two electrodes and is sealed in the Vacuum-Compatible plastic package. This diaphragm is heated to a temperature slightly above the ambient conditions by two on-board resistors. The diaphragm is then exposed to the pressure to be measured, which causes the diaphragm to cool or heat depending on the pressure. This change in temperature is measured by an on-board thermistor and is converted to a pressure reading. The on-board electronics then convert the pressure reading to an electrical signal. The output of the SX05GD2 is a voltage signal proportional to the pressure being measured.
The SX05GD2 pressure sensor device is designed for precision, accuracy, and reliability in various pressure measurement applications. It is a cost-effective solution for monitoring pressure in industrial, consumer, and medical systems. It is easy to install and set up, and its small size makes it highly suitable for applications where space is at a premium.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SX05D | Honeywell Se... | 0.0 $ | 1000 | SENSOR HI-IMP 5PSID BUTN ... |
SX05DD4 | Honeywell Se... | 0.0 $ | 1000 | SENSOR HI-IMP 5PSID DIP P... |
SX05GD2 | Honeywell Se... | 0.0 $ | 1000 | SENSOR HI-IMP 5PSIG DIP P... |
SX0550 | Bulgin | 0.0 $ | 1000 | TOGGLE FULL BOOT BLACK |
SX0550/BRASS | Bulgin | 0.0 $ | 1000 | TOGGLE FULL BOOT BLACK |
SX05-0B00-00 | Broadcom Lim... | 50.52 $ | 1000 | 12GB/S EXPANDERS |
SX05DN | Honeywell Se... | 0.0 $ | 1000 | SX DIFF GAUGE 0 PSID TO 5... |
SST PRESSURE TRANSDUCERPressure Sensor
PRSSR TRNS 0-100BR 4-20MA DINPressure Se...
BRD MNT PRESSURE SENSORSPressure Sensor ...
BRD MNT PRESSURE SENSORSPressure Sensor ...
HEAVY DUTY PRESSURE TRANSDUCERPressure S...
BRD MNT PRESSURE SENSORSPressure Sensor ...