SY10E195JC-TR

Series:	10E, Precision Edge®
Packaging:	Tape & Reel (TR)
Part Status:	Discontinued at Digi-Key
Number of Taps/Steps:	128
Function:	Programmable
Delay to 1st Tap:	1.39ns
Tap Increment:	20ps
Available Total Delays:	1.39ns ~ 3.63ns
Number of Independent Delays:	1
Voltage - Supply:	-4.2 V ~ -5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	28-LCC (J-Lead)
Supplier Device Package:	28-PLCC (11.5x11.5)
Base Part Number:	SY10E195

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SY10E195JC-TR is a device from the family of Clock/Timing – Delay Lines. This device is used primarily for synchronising events in digital systems. It stores a specific amount of delay time and uses it to regulate the timing between two signals, allowing the engineers to accurately control their systems.The principle on which this device works is the dissipation or absorption of an electrical signal over a length of time. This is done using a very long shift register with a series of capacitors and resistors contained in a small package. As successive bits of data are shifted through this shift register, linear delays are created and charge is built up in the capacitors. This creates the desired time delay.The SY10E195JC-TR device is useful for providing a signal timing signal between two digital signals, such as from a microprocessor to an interface chip. This type of delay line can be programmed to provide very accurate signal timing for signals that are moving between two different devices. This signal timing signal enables the signals to be synchronized, which is essential for proper communication between two devices.The SY10E195JC-TR device can also be used as a doubler. This means that when an incoming signal is received, a single-ended signal is output from the same device. This technique can be used in cascading applications, where two devices are linked together. By using the SY10E195JC-TR device in this manner, the output signal can be accurately synchronized with the incoming signal.The SY10E195JC-TR device is designed to offer very Low Power Consumption. This device has an input current of 2μA only and typically, this device consumes less than 10 mW of power. Also, this device is very robust and stable, with an operating temperature range of -40°C to +85°C and its operating voltage range is between 2.5V to 5.5V. This device has a typical propagation delay of around 6 ns and an operating frequency range of up to 35 MHz.The SY10E195JC-TR offers excellent circuit protection, due to its built-in Current Limiting and Temperature Protection features. It also has an Early Warning Signal Output which provides a warning signal if the circuit goes into the Current Limiting or Temperature Protection Modes. This signal helps prevent device malfunction and damage.The SY10E195JC-TR is capable of handling data rates up to 420 Mbps, making it ideal for high-speed data processing applications. The device is also suitable for use in applications where clock jitter is a critical factor.In conclusion, the SY10E195JC-TR is an excellent device for providing accurate signal timing in digital systems. It is designed to offer excellent circuit protection and can handle high-speed data processing applications. It is also suitable for use in applications where clock jitter is a critical factor. This device is well-suited for synchronizing events in digital systems and is also useful as a doubler in cascading applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description