T10C360BF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a type of transistor that controls current and voltage in an electronic system. A specific type of thyristor, the T10C360BF, is used in a variety of applications. This device is a four-quadrant analog switch, and can control the flow of current and voltage in either direction. It is an integrated circuit, meaning it is composed of multiple transistors on a single chip.

The T10CF360BF is designed primarily to be used as a circuit breaker. It is most often used to control the flow of AC voltage by cutting off power in the event of an overload or short circuit. It can be used in a variety of AC or DC applications. The device is rated for a maximum voltage of 380VAC and can handle up to 10A of current. It has a maximum response time of 0.4 ms.

The T10C360BF has a four-quadrant operation, meaning it can be used to control the flow of current or voltage in both directions. It is composed of two SCRs (Silicon Controlled Rectifiers) that are connected in series. The SCRs are triggered by applying a voltage to their gate terminals. When the voltage is greater than the junction potential of the device, it becomes conducting and allows current or voltage to pass through it. The T10C360BF can also be triggered by applying a current pulse to the gate terminals. Once triggered, the current and voltage remain until the control voltage is removed.

The T10C360BF can be used in a variety of applications where control of the flow of electricity is necessary. It can be used as a circuit breaker, as well as for controlling Motors, Heaters, Lifts, Electric Furniture and more. It is also used in external lighting and security systems, and in applications where low power consuming devices, such as LEDs, require protection against voltage and current surges.

The T10C360BF is a very versatile device, and is used in a variety of applications where control of the flow of current and voltage is necessary. It is designed for use in both AC and DC systems, and is an integrated circuit composed of two SCRs connected in series. It is triggered by applied voltage or current, and is most often used as a circuit breaker. It is used in a variety of applications, from controlling motors and lifts, to security systems and external lighting.

The specific data is subject to PDF, and the above content is for reference