T410-800T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are semiconductor devices that have three terminals, with the three terminals known as the anode, cathode and gate. TRIACs (Triode for Alternating Current), also called symmetrical thyristors, are devices that are similar to thyristors, but with two thyristors connected together in an inverse parallel arrangement. The T410-800T is an example of a TRIAC, and it is often used in switching applications and temperature control. In this article, we will discuss the application field and working principle of the T410-800T.

Application Field

The T410-800T is designed to be used in applications such as dimmers, motor speed control, light or temperature control, and as a lighter or heating appliance switch. It can be used in both AC and DC circuits and is also suitable for use in DC circuits in low-power radio and temperature control applications. The device is also suitable for use in welding applications and as an AC line switch in electric circuits.

Working Principle

The T410-800T is a four-layer thyristor with two anodes, two cathodes and a gate. When the anode-cathode voltage reaches the holding voltage, current can flow through the two anodes and two cathodes. The current then flows into the gate terminal and is controlled by the voltage applied to the gate terminal. The device is triggered by a low-voltage gate signal, but once triggered, the device is capable of switching high currents. When the voltage at the gate terminal exceeds the turn-off voltage, the device switches off and the current flow stops.

The T410-800T is also equipped with a breakdown voltage protection circuit. This circuit helps to prevent overvoltage from causing damage to the device. When the voltage between the anode-cathode terminals exceeds the breakdown voltage of the device, the circuit automatically reduces the voltage and current, protecting the device from damage. It also helps to ensure that the device does not exceed its maximum current or voltage ratings.

The T410-800T is used in a variety of applications because it is compatible with both AC and DC circuits and is able to switch high currents. It is also equipped with a breakdown voltage protection circuit, allowing it to be used safely in applications that may require the switching of high voltages or currents. It is easy to use and can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference