T810T-6I

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	8A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	60A, 63A
Current - Gate Trigger (Igt) (Max):	10mA
Current - Hold (Ih) (Max):	15mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220AB Insulated
Base Part Number:	T8**T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are semiconductors with three terminals whose current (I) can control their voltage characteristics by means of gate signal in a bipolar junction transistor (BJT). The exact behavior of a TRIAC is a bit more complex than a BJT, and it is the nature of the gate signal that dictates how the TRIAC controls current and voltage. One such three-terminal device is the T810T-6I, a bidirectional current-controller developed by Swiss semiconductor manufacturer, STMicroelectronics. The device consists of two semiconductor chips containing a single PN junction and two layers of Field Plate isolation on one side. The control circuits these components are connected to provide the ability to control current in both the positive and negative directions. This makes the device suitable for a wide range of applications, particularly in the area of motor control in industrial and consumer electronics. The T810T-6I operates by applying a signal to the gate terminal which turns on and off one or both of the diodes in the PN junction. This is what makes the device bidirectional, with the diodes alternately turning on or off when charge is applied to the gate terminal. When the diodes turn on, the device turns on and the current starts to flow. When the device turns off, the current stops flowing and the voltage on the device drops. Here is a brief overview of how the T810T-6I works:

• Applying a voltage to the gate terminal produces a gating current that begins to flow through the device, turning on the diodes and allowing current to flow through the device.
• The current through the device can then be controlled by varying the voltage applied to the gate terminal. This makes it possible to switch the device on and off in either the positive or negative direction.
• As the current through the device is switched on and off, the internal capacitance of the device is charged or discharged and therefore changes the voltage of the device.
• The voltage on the device is further controlled by the external gate signal. When the gate signal is applied, power is wasted and the voltage is reduced. Conversely, when the gate signal is removed, the voltage increases. Depending on the amount of external gate signal, the voltage across the device can be switched off or on.

The T810T-6I is well-suited to a number of applications, such as AC motor control, power supplies, AC switch mode power supplies, light dimmers, and temperature controllers. In many of these applications, the device is used to control the speed of the motor or regulate the output voltage of the power supply. Additionally, it can be used to switch on and off various other electronic components, such as fans and solenoids. The T810T-6I is a very versatile device, and its usability and reliability makes it a popular choice for many industrial and consumer applications. While the device does have its limitations at high temperatures, it is still an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description