T820081404DH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors – SCRs

Thyristor is a kind of special semiconductor device that can control a large electric current with a small control signal. It is often referred to as a solid state switch. They are used in power electronics circuits, such as UPS systems, inverters, motor control systems, and many other applications.

A thyristor is a solid-state semiconductor device that consists of four semiconductor layers. Each of these layers is from different material, so when properly connected and supplied with current, the thyristor may be triggered into conduction.

The most common type of thyristor is a silicon-controlled rectifier (SCR). It is a four-layer, three-terminal semiconductor device that can also be used as a switch. SCRs are typically used to control high voltage, high current, and/or high-power applications in AC or DC circuits.

T820081404DH is a type of SCR and it is used for the conduction of an AC voltage up to 1KV. It has a low gate-trigger current requirement and low on-state voltage drops, both of which make it well-suited for a wide range of applications such as motor speed control, solar cell panels, and overvoltage protection systems.

The working principle of an SCR is relatively simple. When it is connected to positive and negative power, current will flow through the device\'s anode and cathode. However, this flow is prevented until a small amount of current or voltage is applied to the gate terminal, which will then turn on the SCR, allowing current to flow freely between the anode and cathode. When the gate voltage is removed, the current flow will be cut off and the device will turn off.

T820081404DH is most commonly used in the following applications: AC motor speed control, solar cell panels, and overvoltage protection systems. In motor speed control applications, SCRs are used to control the speed of the motors and adjust the current to suitable levels. In solar cell panels, SCRs are used to regulate the output of the panel, whereas in overvoltage protection systems, SCRs are used to protect sensitive electrical components from damage due to overvoltage surges.

In conclusion, T820081404DH is a type of SCR which is widely used in AC motor speed control, solar cell panels, and overvoltage protection systems. It has the capability to control a large electric current with a small control signal, making it an ideal component for those applications. Additionally, the working principle of an SCR is dependent on the application of a small amount of current or voltage to the gate terminal, which will turn on the SCR, allowing current to flow freely between the anode and cathode. When the gate voltage is removed, the current flow will be cut off and the device will turn off.

The specific data is subject to PDF, and the above content is for reference