T86D336M016EAAL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are an electrode composed of two terminals which acts as a conductor. They are capacitor-like electronic components which contain electrolytic materials in a dielectric medium, usually with a form of aluminum oxide, and are known commonly as laser diodes or electroacoustic capacitors. Tantalum capacitors are widely used in many applications where the application of capacitors is essential. In this article, we will discuss the application field and working principle of T86D336M016EAAL tantalum capacitors.

The T86D336M016EAAL belongs to the category of surface mount tantalum capacitors. It is an electrolytic capacitor with an electrolyte of tantalum, which acts as one of the two electrodes. It is designed for use in applications involving high voltage, high temperature and vibration such as in automotive and aerospace applications. It has a very low equivalent series resistance (ESR) and high ripple current rating. The total capacitance is 36 uF, thevoltage rating is 16 V, and the maximum operating temperature is 125°C.

In terms of its application field, T86D336M016EAAL tantalum capacitors are mainly used in the automotive, aerospace and computer engineeringrelated industries. These types of capacitors are ideal for storing and releasing energy in response to current pulses in applications such as ignition systems, fuel igniters, electric vehicle systems, power supplies, switching regulators, voltage converters, high efficiency audio amplifiers and high frequency oscillators. They can be used in both DC (direct current) and AC (alternating current) circuits.

The working principle of T86D336M016EAAL tantalum capacitors is based on the electrical operation of the two terminals. When a voltage is applied between the two electrodes, ions in the electrolyte (usually an aluminum oxide layer) are attracted to the anode (positive) terminal, and electrons are attracted to the cathode (negative) terminal. An electric field is created in this way between the two electrodes and an electrolyte charge builds up in response to the applied voltage. This charge continues to build up until the breakdown voltage is reached, at which point it is discharged into the circuit.

At the same time, the electrolyte will act to block the charging current when the maximum rated voltage has been achieved. This charge blocking is known as "Impedance" and it provides protection from excessive current draw. The capacitance of the T86D336M016EAAL capacitor decreases over time due to the electrolyte’s gradual breakdown. This breakdown can be reversed by reforming the electrolyte by elevating the voltage to the rated level for a few minutes.

In conclusion, T86D336M016EAAL tantalum capacitors are surface mount capacitors used in a variety of industries, from automotive to aerospace, and computers. They are ideal for providing energy storage and current pulses for a variety of applications, and have a very low ESR and high ripple current rating. Their working principle is based on the electrical operation of the two terminals, with ions being attracted to the anode, and electrons to the cathode, resulting in an electric field building up. The capacitance of the capacitor decreases over time, however, this can be reversed by reformulating the electrolyte.

The specific data is subject to PDF, and the above content is for reference