T9K7320903DH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are essential components analyzing and controlling AC circuits. They are typically categorized into four types: SCRs (Silicon Controlled Rectifiers), Triacs, UJTs (Unijunction Transistors), and DIACs (Diode AC Switches). This article discusses the specific application field and working principle of the T9K7320903DH SCR in particular.

T9K7320903DH Overview

The T9K7320903DH is a bidirectional SCR module, allowing current to flow in two directions through the device simultaneously. It has four main terminals: the main anode (A1 and A2), the main cathode (K1 and K2), an external gate (G), and an internal gate. The T9K7320903DH has a bidirectional peak current rating of 20A, a VDRM/VRRM of 650V, and a maximum VGT rating of 1.5V and 4V. Additionally, the device is UL recognized and RoHS compliant, making it a more practical choice than its counterparts.

Application field

The T9K7320903DH, being a bidirectional SCR, is typically used in applications such as welding rectifiers, AC motor control, DC motor control, frequency converters, and AC phase controllers. An AC motor control system, for example, typically uses a phase controller — commonly referred to as a phase-angle controller — to regulate and monitor the voltage in the motor. The SCR, as part of the phase controller, acts as an electronic switch, allowing for current to flow through the wires when the phase angle is appropriate and cutting off the current when the phase angle is off. In addition, the T9K7320903DH can be used for other DC or AC control systems as well, since this type of SCR allows for controlled conduction in both directions.

Working Principle

The T9K7320903DH SCR works by manipulating the thyristor’s main anode and main cathode pins. The main terminal pins allow current to flow through the device when they are forward biased, while the external and internal gate terminals can be used to control the current. When the voltage across the SCR’s main terminal pins reaches a certain threshold, it will enter into conduction mode. This threshold, in this case, is the VDRM/VRRM of 650V. The external and internal gate terminals can then be used to control the current, since the current flowing through the main terminal pins will vary depending on how much voltage is applied to the external gate terminal. When the voltage on the gate terminal exceeds the gate threshold voltage, it will allow for more current to flow through the device, which is how the SCR is used in various AC and DC control systems.

In conclusion, the T9K7320903DH is a bidirectional SCR that is often used in welding rectifiers, AC motor control systems, DC motor control systems, frequency converters, and AC phase controllers. The main terminal pins allow current to flow through the device when they are forward biased, while the external and internal gate terminals can be used to control the current. When the voltage across the SCR’s main terminal pins reaches a certain threshold, the SCR will enter into conduction mode. At this point, the external and internal gate terminals can be used to control the amount of current that flows through the device.

The specific data is subject to PDF, and the above content is for reference