TAJT225M025RNJ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are a type of electrolytic capacitors, which use tantalum as an oxide-based electrolyte and have higher capacitance per unit volume than other alternatives such as aluminum electrolytic capacitors. They are widely used in electronic equipment such as computers, mobile phones, and automotive electronics. The TAJT225M025RNJ is a surface-mount tantalum capacitor which offers better performance than other tantalum capacitors due to its low profile, low ESR (equivalent series resistance), and high capacitance. It is ideal for applications where space is limited and high capacitance is needed.

The TAJT225M025RNJ is a radial-leaded, surface mounted tantalum capacitor with a maximum capacitance of 225 µF. It is made with a sintered tantalum anode and a manganese dioxide cathode. The anode is coated with a layer of tantalum pentoxide (Ta2O5) which serves as a dielectric layer and provides a high electrostatic capacitance. The cathode is connected to the anode through a silver-plated nickel-chromium-manganese alloy wire. The capacitor is then sealed with a resin and a coating of epoxy to protect it from the environment.

The TAJT225M025RNJ has a dielectric strength of 200V DC and a temperature range from -55 to +125°C. Its operating frequency range is from 120Hz to 10MHz. This capacitor is available in a variety of case sizes ranging from 7.3mm to 25.3mm, making it suitable for a wide range of applications.

The TAJT225M025RNJ is used in various types of electronic devices and applications, such as signal processing, power supplies, energy storage and more. It is ideal for signal line decoupling, power supply bypassing, voltage regulation and more. In addition, it is suitable for high current applications such as power amplifiers and high performance audio systems.

The working principle of the TAJT225M025RNJ is based on the principle of dielectric constant. When it is subjected to an electric potential, a charge is stored in the device. This charge has two parts, an anode charge and a cathode charge. When a voltage is applied to the device, the anode charge increases, while the cathode charge decreases. As a result, the electric field strength inside the device increases, allowing the device to store more energy.

The TAJT225M025RNJ offers many advantages over other capacitors, including a high capacitance-to-volume ratio, low ESR, and high ripple current. It also has a low leakage current compared to other capacitors. The TAJT225M025RNJ is suitable for applications where space is limited and high capacitance is required.

The specific data is subject to PDF, and the above content is for reference