TAP156M010SCS

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	D
Lead Spacing:	0.098" (2.50mm)
Height - Seated (Max):	0.354" (9.00mm)
Size / Dimension:	0.197" Dia (5.00mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Lifetime @ Temp.:	1000 Hrs @ 85°C
Series:	TAP
ESR (Equivalent Series Resistance):	3.7 Ohm
Type:	Conformal Coated
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	15µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitor, also known as tantalum electrolytic capacitor, is a type of electrolytic capacitor, which uses a tantalum foil as an anode, covered with an oxide layer as the dielectric, and a liquid or solid electrolyte as the cathode. Tantalum capacitors are widely used in a range of electronics applications due to their small size, long life and capacitance stability. One type of tantalum capacitor of particular interest is the TAP156M010SCS capacitor.

Application Field of TAP156M010SCS Capacitor

The TAP156M010SCS capacitor is a surface-mounted device, designed for use in automotive, computer and communications systems, instrumentation, medical equipment and consumer electronics. It provides particularly useful advantages over regular tantalum capacitors due to its compactness, stability, and long service life.This capacitor offers several advantages that enable applications, such as:

• A low ESR (equivalent series resistance), which means that the amount of power dissipated as heat during operation is low.
• Excellent dry-out resistance, which means that the capacitor is highly resistant to failed performance due to moisture absorption or other contaminants.
• High CV (capacitance multiplier voltage) ratings, which enables higher performance with lower values of capacitance.
• Improved temperature performance, which helps reduce the capacitor’s self-heating and therefore its power consumption.

These advantages make TAP156M010SCS capacitors ideal for use in applications requiring high capacitance, high temperature operation and environmental resistance. For example, the capacitors can be used in automotive ignitions, in satellites and military aerospace systems, in instrumentation, where a wide range of voltage and temperature fluctuations may occur, and in consumer electronics such as DVD players.

Working Principle of TAP156M010SCS Capacitor

A TAP156M010SCS capacitor works on the same principles as other types of electrolytic capacitors. Its two electrodes are separated by an insulating material, known as the dielectric layer, which is typically a polymer or an oxide layer. When a voltage is applied to the capacitor’s terminals, the dielectric layer is polarized and allows the current to flow through the capacitor in an alternating pattern, building up an electric charge on either side of the dielectric layer. This results in a capacitance, or a measure of how much charge the capacitor can store. TAP156M010SCS capacitors offer several advantages as compared to standard tantalum capacitors. One is their reduced size and improved arc resistance, which enables them to be used in more confined spaces and in more high-temperature applications. In addition, their temperature performance is excellent, and they are highly resistant to environmental factors such as moisture and dust. In order to ensure that the capacitor works correctly and safely, it must be correctly connected to the correct voltage. It is important to note that TAP156M010SCS capacitors have a low ESR, so they should always be placed as close to the load as possible, to limit the voltage drop across them.

Conclusion

In conclusion, the TAP156M010SCS capacitor is an ideal component for use in a variety of electronic applications. It is a small, long-lasting, temperature-resistant and highly stable device that offers excellent performance for the money. It is particularly popular for use in automotive and aerospace applications, due to its ability to withstand high temperatures and harsh environments. Its low ESR also makes it suitable for applications in which high capacitance is desired at low costs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description