Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	General Purpose
Manufacturer Size Code:	A
Lead Spacing:	0.197" (5.00mm)
Height - Seated (Max):	0.276" (7.00mm)
Size / Dimension:	0.177" Dia (4.50mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Lifetime @ Temp.:	1000 Hrs @ 85°C
Series:	TAP
ESR (Equivalent Series Resistance):	6 Ohm
Type:	Conformal Coated
Voltage - Rated:	16V
Tolerance:	±10%
Capacitance:	3.3µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors are widely used in consumer, automotive, and industrial electronics, such as in cell phones, computers, and medical devices. This type of capacitor is one of several types of capacitors available for use in electronic applications and are especially useful for providing a high level of reliability, a low ESR (equivalent series resistance), and excellent stability. The TAP335K016BRS is a polarized, high-voltage, surface-mount tantalum capacitor. It is a non-solid aluminum electrolytic type and can be used for a variety of different applications, including input and output filtering, power supply bypassing, energy storage and supply buffering, power isolation and switch-mode power supply control. This type of capacitor has a single-layer construction consisting of two bipolar sections with a smaller metal-to-metal contact barrier. The TAP335K016BRS is designed to deliver excellent performance in a wide range of applications, including audio equipment and industrial electronics. It has a rated capacitance range of 22 to 33 microfarads, a rated voltage of 35 volts, and a temperature range of -55°C to +125°C. The leads of the TAP335K016BRS are compatible with the current IPC-SM-782C standard and can be soldered using IR, Vapor-Phase, and Wave soldering techniques. It also has a maximum leakage current of 0.2 μA.The working principle of the TAP335K016BRS is based on the capacitance of dielectrics. When a dielectric material, such as aluminum oxide or tantalum pentoxide, is placed between two metal plates or electrodes, an electric field is formed that causes the electrons to be trapped between them. The resulting capacitance depends on the area of the electrodes, the type of dielectric material used, and the distance between the electrodes. In the case of the TAP335K016BRS, its dielectric material is aluminum oxide. When an electric field is applied to the aluminum oxide layer, the molecules become polarized, allowing electrons to flow across them. The molecules then store a fixed amount of energy, which can then be used to filter out any unwanted noise or to store energy that can be released on demand.In addition to its other features, the TAP335K016BRS is also designed to protect against reverse leakage, meaning that it will not leak charge if a reverse-polarity voltage is applied to it. This is especially useful in applications such as automotive electronics, where reverse-polarity protection is a must-have safety feature. The reverse leakage current is normally measured in μA (microamperes) and is typically less than 1 μA for this type of capacitor.In conclusion, the TAP335K016BRS is a high-voltage, surface-mount tantalum capacitor that is designed for use in applications such as audio equipment and industrial electronics, where reliability and stability are essential. It has a rated capacitance between 22 and 33 microfarads, a temperature range of -55°C to +125°C, and a maximum reverse leakage current of 0.2 μA. The working principle behind the TAP335K016BRS is based on the capacitance of aluminum oxide, which allows electrons to be trapped between two metal electrodes and stored as energy. Finally, it also provides excellent protection against reverse leakage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description