TAP335M035GSB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TANTALUM CAPACITORS

Tantalum capacitors, sometimes known as tantalum electrolytic capacitors, are one of the most common types of capacitor used in electronics. They are made from a tantalum powder pressed into a pellet shape and then sintered, or heated, to form a solid body. The body of the capacitor is coated with an oxide film which acts as the dielectric material. An electrolyte is then added, usually a mixture of ethylene glycol and alcohol. This electrolyte provides the necessary electrical connection between the electrodes and the oxide film.

The TAP335M035GSB tantalum capacitor is a general-purpose device used for many applications such as communications systems, mobile phones and laptop computers. This capacitor is typically rated for a voltage of-1V to 16V and a capacitance of 335μF. It also has a maximum rated dissipation factor of 4.5 mOhms (measured at 25°C). It is designed for high frequency operation and is suitable for both surface mount and through hole mounting.

Tantalum capacitors operate on a slightly different principle than traditional capacitors. Unlike traditional capacitors which have an air gap between the two conductive plates, the plates of a tantalum capacitor are separated by a thin dielectric layer. This dielectric layer is formed by an oxide film which is formed when the capacitor is subjected to a high voltage. This high voltage separates the positive and negative charges in the layer, which creates the separation between the plates. This separation allows the capacitor to store electricity, creating a charge and discharge cycle.

The TAP335M035GSB has a low dissipation factor and low leakage current, making it an ideal choice for use in automotive, medical or industrial applications. In addition, its low ESR (equivalent series resistance) ensures that the capacitor is able to hold a charge for long periods of time and is less vulnerable to vibrations or extreme temperatures. This makes it suitable for use in applications such as airbag sensors, metering systems and other critical applications.

Tantalum capacitors are also used in DC-DC converters for power supplies, energy storage and switching applications. When connected in parallel, the capacitors reduce the amount of current needed to transfer power from one source to another. This reduces the amount of power consumed during the transfer process, making it more efficient. In addition, the capacitors also act as filters, blocking out noise and voltage transients and reducing the possibility of electrical damage to sensitive equipment.

The TAP335M035GSB is an ideal choice for many applications where high capacitance, low ESR and low dissipation factor are required. It is an affordable and reliable choice in many requirements due to its low cost and high quality. It is also widely used in automotive, medical and industrial applications due to its high performance and long life span.

The specific data is subject to PDF, and the above content is for reference