TBAT54,LM

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	30V
Current - Average Rectified (Io):	140mA
Voltage - Forward (Vf) (Max) @ If:	580mV @ 100mA
Speed:	Small Signal =
Reverse Recovery Time (trr):	1.5ns
Current - Reverse Leakage @ Vr:	2µA @ 25V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	SOT-23-3
Operating Temperature - Junction:	150°C (Max)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

TBAT54 and LM are two of the most popular types of diodes in the industry. They are used in a variety of applications, including rectification, signal conditioning, and power control. The common features of both types of diodes include: ability to withstand large voltage and current loads, low forward voltage drops, and low power losses. In this article, we will discuss the application field and working principle of TBAT54 and LM rectifiers.

Applications

TBAT54 and LM are used in a variety of applications such as rectification, voltage clamping, and signal conditioning. They are also used in DC-DC converters as well as AC-DC converters for high-efficiency power conversion. Typically, TBAT54 rectifiers are used for higher-power applications where low voltage losses and higher efficiency are required. On the other hand, LM rectifiers are mostly used for low-power applications and can handle relatively lower voltage drops and voltage clamps.Diodes are also used in many signal conditioning applications, such as limiting current, peak current protection, and signal attenuation. TBAT54 and LM diodes are also used in power supply circuits, voltage regulators, thermostats, and other power-related circuits.

Working Principle

The basic operation of a diode is based on the PN-junction. In a PN-junction, a positively-charged material (the "p-side") is placed adjacent to a negatively-charged material (the "n-side"). When a voltage is applied across the junction, electrons from the "p-side" will flow towards the "n-side". This flow of electrons continues until the voltage reaches the breakdown voltage of the diode. At this point, the diode will start to conduct current and can cause a short circuit.TBAT54 diodes have a high reverse breakdown voltage and low forward voltage drop. This combination makes them suitable for high-power applications where a high-power supply is needed. On the other hand, LM diodes have a low breakdown voltage and relatively high forward voltage drop. This combination makes them suitable for low-power applications.

Conclusion

TBAT54 and LM diodes are two of the most popular rectifiers in the industry. They are used in a variety of applications such as rectification, power control, and signal conditioning. The basic operation of a diode is based on the PN-junction, and TBAT54 and LM diodes have different characteristic properties which make them suitable for different applications. In conclusion, TBAT54 and LM rectifiers are used in a variety of applications and their working principle is based on the PN-junction. They are suitable for both high-power and low-power applications, depending on the need and characteristics of the diode.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description