TC1413COA713

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Gate Drivers provide power management control systems that allow external electrical components to be activated or deactivated as required. TC1413COA713 is a high voltage I2C controlled level changing amplifier. This device transforms an I2C digital signal into a high voltage analog signal, allowing the direct activation and deactivation of electronic components. It can be used to drive MOSFETs, IGBTs, MOS Field Effect Transistors (MOSFET), Triacs, and Bipolar Gate Drivers (BGT).

The TC1413COA713 operates in a wide range of environmental temperatures, from up to 85ºC to down to -55ºC. This makes it suitable for use in a wide range of industrial, consumer and commercial applications. Its output current is adjustable from 1 mA up to 320 mA, and its input voltage range is up to 25 V.

The TC1413COA713 provides a digital interface between the I2C port and the logic level of the device. The device consists of a level translator and an I2C interface transistor. When the I2C port is accessed, a low voltage pulse is emitted and sent through the level translator to a transistors. The transistor then activates or deactivates the high voltage MOSFET devices according to the command received from the I2C port. The high voltage MOSFETs can then either activate or deactivate the required devices.

In addition to the I2C port, the TC1413COA713 is also equipped with a single input and single output configuration. The single output of the device is capable of supplying up to 320 mA of current, providing power for many types of electronic components. The device can also be powered through a separate power supply or a 5 V input, making it suitable for use in many different power management applications.

The device\'s working principle is based on two key parameters: the voltage, or Vdd, and the current limit, or Source Range. The Vdd, or voltage, dictates the amount of electrical energy that the device will draw from the power source. The current limit sets the upper and lower limits of the amount of electrical current that the device can draw. Once these parameters are set, the device will only draw the necessary electrical energy for power management applications.

The TC1413COA713 is suitable for a range of applications including driving high-power motors, AC and DC switching, triac control and analog remote control. It can also be used for controlling lighting, water pumps, motors and other devices in industrial and commercial environments. In addition, the device can be used in battery powered systems, or to increase the level of control and safety of sensitive components and systems.

The application field of the device is very broad and its advantage lies in its simplicity, efficiency and flexibility. The device is also highly reliable and can be used in a variety of power management and remote control applications. Whether controlling motors, pumps or lighting, the convenient and versatile TC1413COA713 provides a reliable and effective solution.

The specific data is subject to PDF, and the above content is for reference