TCM811LERCTR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC – Supervisors are the most commonly-used components for regulating the operation of digital circuits. The TCM811LERCTR is a popular choice for a wide range of applications. The module is designed to withstand a range of environments and can provide effective supervision of the power supply to ensure reliable and safe performance.

The TCM811LERCTR provides two forms of output. The first is an integrated low voltage detector (LVD), and the second is a logic level output. The LVD is designed to detect over-voltages, under-voltages and voltage transients. It signals a low voltage fault by providing a TTL high output. This can be used to assert a reset signal on the power supply to prevent further damage. The logic output is used to indicate that the supply is within the specified voltage range and is suitable for use.

The basic operation of the TCM811LERCTR is very simple. The module is powered from the main supply, from which it derives its operating voltage. The voltage is then compared against either a fixed threshold or one that is adjustable using external circuitry. If the voltage is below the set threshold the module will assert its output signals to indicate the fault. If the voltage is above the threshold, then the output will stay in the low state.

In some applications it is necessary to have the ability to monitor multiple supplies. This can be accomplished with multiple TCM811LERCTR modules. Each module is powered by one supply and the outputs are connected to a logic circuit. This allows a single logical OR combination of all the modules’ outputs to be monitored. If any of the modules detect a low voltage condition, then the logic circuit will assert the appropriate reset signal.

The TCM811LERCTR has a wide variety of applications. It can be used in circuits where over-voltage, under-voltage and/or voltage transients need to be detected and monitored. It is also suitable for use in battery management systems, where the voltage and current levels must be carefully monitored to ensure reliable and safe operation. This module can also be used in device or system level supervision, where a central reset is required if the power supply under goes an abnormal condition. Additionally, it can be used in power supplies, to protect equipment from over-voltage conditions.

In summary, the TCM811LERCTR is a popular, easy to use PMIC – Supervisors module. It is suitable for a wide range of applications, including battery management and device or system level supervision. With its integrated LVD and logic output, the module is able to detect and respond to both over-voltage and under-voltage conditions. This means that it can provide reliable and safe operation in a variety of environments, making it a valuable addition to any digital circuit.

The specific data is subject to PDF, and the above content is for reference