| Allicdata Part #: | F10657-ND |
| Manufacturer Part#: |
TCSGAA |
| Price: | $ 51.70 |
| Product Category: | Industrial Controls |
| Manufacturer: | Littelfuse Inc. |
| Short Description: | MODULE CUR SENSOR 2-20A 3-50VDC |
| More Detail: | N/A |
| DataSheet: |  TCSGAA Datasheet/PDF |
| Quantity: | 17 |
| 1 +: | $ 47.00430 |
| 10 +: | $ 44.24110 |
| 25 +: | $ 42.85860 |
| 50 +: | $ 40.09360 |
| 100 +: | $ 37.88150 |
| Series: | TCS |
| Part Status: | Active |
| Type: | Current Sensing AC |
| Trip Status: | Energized High |
| Trip Range: | 2 ~ 20A AC |
| Delay Time: | -- |
| Voltage - Supply: | -- |
| Output Type: | Solid State |
| Circuit: | SPST-NO (1 Form A) |
| Contact Rating @ Voltage: | -- |
| Mounting Type: | Chassis Mount |
| Operating Temperature: | -20°C ~ 60°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The Transformer Current Sensing with Gain and Attenuation Application (TCSGAA) system is an important piece of equipment used in electrical designs. It is used to measure the current in transformers, circuits, and other electrical systems. The system is based on two important aspects of electrical engineering: current sensing and amplifier gain and attenuation.
Current sensing is the process of measuring the current in AC or DC electrical systems. This is done by using a current sensor, such as a current transformer. The TCSGAA system consists of two main components: a current transformer and an amplifier. The current transformer is used to pick up the current in the system and the amplifier is used to gain or attenuate the signal. With the TCSGAA system, one can accurately measure and monitor the current in a system.
The amplifier in the TCSGAA system works by controlling the gain or attenuation of the current or voltage signal from the current transformer. The amplifier’s gain or attenuation can be adjusted to match the input signal’s characteristics. This allows for a more accurate measurement of the current in the system. The gain and attenuation of the amplifier can be set to ensure that the output signal is accurate and reliable.
The output of the TCSGAA system is sent to a relay output, which is where the measured current or voltage signals can be sent for further processing. The relay output can be used to trigger alarms, activate other control devices, or initiate other actions. The signal from the relay output can also be used to monitor the system or record data.
The TCSGAA system is used in a variety of applications. It can be used to monitor the current in motors, power supplies, and other electrical systems. It is also used in testing and analysis of circuits, in industrial, automotive, and aerospace designs. Furthermore, the TCSGAA system is used to measure currents in electrical systems for safety and secure applications.
In conclusion, the Transformer Current Sensing with Gain and Attenuation Application (TCSGAA) system is a valuable tool for monitoring current in AC and DC electrical systems. It consists of two main components: a current transformer and an amplifier. The amplifier can be used to gain or attenuate the signal from the current transformer, allowing for an accurate measurement. The output of the TCSGAA system is sent to a relay output, which can be used for monitoring and other control applications. The TCSGAA system is used in a variety of industries, and is an important part of electrical systems design and safety.
The specific data is subject to PDF, and the above content is for reference
CURRENT SWITCH 5-50A
21-890=WILMAR POWER MONITOR
RELAY CUR SENSE 24VDC 5-5A
REL AC GROUND FAULT SENS 120VAC
3-PHASE OVER/UNDER VOLT RLY
TACH RLY 300 RPM 115V