| Allicdata Part #: | 1951-2618-ND |
| Manufacturer Part#: |
TES 2N-0513 |
| Price: | $ 15.53 |
| Product Category: | Power Supplies - Board Mount |
| Manufacturer: | Traco Power North America |
| Short Description: | DC DC CONVERTER 15V |
| More Detail: | Isolated Module DC DC Converter 1 Output 15V 13... |
| DataSheet: | TES 2N-0513 Datasheet/PDF |
| Quantity: | 100 |
| 1 +: | $ 14.12460 |
| 10 +: | $ 11.86420 |
| 25 +: | $ 11.67870 |
| 50 +: | $ 11.12270 |
| 100 +: | $ 10.19580 |
| 250 +: | $ 10.01040 |
| 500 +: | $ 9.86209 |
| Current - Output (Max): | 135mA |
| Supplier Device Package: | -- |
| Size / Dimension: | 0.94" L x 0.54" W x 0.36" H (24.0mm x 13.7mm x 9.3mm) |
| Package / Case: | 16-SMD Module, 6 Leads |
| Mounting Type: | Surface Mount |
| Efficiency: | 73% |
| Operating Temperature: | -40°C ~ 85°C (With Derating) |
| Features: | SCP |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 1.5kV |
| Power (Watts): | 2W |
| Series: | TES 2N |
| Voltage - Output 4: | -- |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 15V |
| Voltage - Input (Max): | 9V |
| Voltage - Input (Min): | 4.5V |
| Number of Outputs: | 1 |
| Type: | Isolated Module |
| Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are commonly used electronic devices that convert voltage from one level to another. TES 2N-0513 is a specific type of DC-DC converter, designed for efficient power conversion between higher and lower levels. It is primarily used in applications where input and output voltage levels are very different, and the maximum output current is low. This article will discuss the application field and working principle of TES 2N-0513.
The main application field of TES 2N-0513 is narrow voltage level step-down applications. This includes applications where the input voltage levels are significantly higher than the output voltage levels, such as a vehicle’s 12 volts to a 1.5V power supply for LCD or other electronics. The TES 2N-0513 can also find uses in vehicles and other applications where a low output current is required, such as the current needed for a low power radio device. It is also suitable for different types of battery chargers where there is a need to convert higher voltages to lower ones.
The working principle of TES 2N-0513 is based on buck-derived and switch-mode techniques. The device consists of two main sections – the input stage and the output stage. In the input stage, the TES 2N-0513 converts the higher input voltage into a variable voltage level by using two rail-to-rail N-type MOSFET switches. The rail-to-rail switches ensure that the voltage remains within the allowable range for the circuitry. The variable voltage is then passed to the output stage, where it is further adjusted to the level required for the application.
In the output stage, the TES 2N-0513 uses an integrated charge-pump circuit to generate the required voltage level, based on the input voltage. The integrated charge-pump circuit is then connected to an inductor, which is used to filter the current and convert it into a regulated output voltage for the application. This regulated output voltage can then be adjusted as needed by using the on-board potentiometers.
Overall, the TES 2N-0513 is a very efficient and reliable DC-DC converter for applications where there is a need to convert higher voltages to lower ones. Its main application field is narrow voltage level step-down applications, such as those found in vehicles or low power radio devices. The device works by using two rail-to-rail N-type MOSFET switches, followed by an integrated charge-pump circuit and an inductor for filtering, to generate a regulated output voltage. In addition, the output voltage can be further adjusted by using the on-board potentiometers.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| LED-TESTER-BOX | Lumex Opto/C... | 0.0 $ | 1000 | LED TESTER BOX |
| DS650/850 TEST BOARD | Artesyn Embe... | 119.08 $ | 1000 | TEST BOARD FOR DS650/DS85... |
| P716B-WAFER-TESTED | Microsemi Co... | 0.0 $ | 1000 | P716B-WAFER-TESTED |
| TESP5700 | Vishay Semic... | 0.0 $ | 1000 | PHOTODIODE PIN SIDE VIEWP... |
| TESD5V0V4UA RDG | Taiwan Semic... | 0.07 $ | 6000 | TVS DIODE 5V 19V 2510P10 |
| TEST2600 | Vishay Semic... | -- | 4653 | PHOTOTRANSISTOR NPN SIDE ... |
| AD-3050-SEAL-TEST-EQ-NC | TE Connectiv... | 4.16 $ | 1000 | AD-3050 SEAL TEST EQUIPHe... |
| TESD5V0L1UC RJG | Taiwan Semic... | 0.03 $ | 5000 | TVS DIODE 5V 15V DFN1006L |
| PTC-TESTBENCH-MLX90316 | Melexis Tech... | 203.88 $ | 1000 | PTC04 TESTBENCH MLX90316 |
| MELEXCM TESTINTERFACE | Melexis Tech... | 0.0 $ | 1000 | KIT DEV FOR MLX81100 MLX8... |
| MLX80104 TESTINTERFACE | Melexis Tech... | 25.23 $ | 1000 | INTERFACE BOARD MINIE-MLX... |
| P715B-WAFER-TESTED | Microsemi Co... | 0.0 $ | 1000 | P715B-WAFER-TESTED |
| PTC-TESTBENCH-MAGNETIC | Melexis Tech... | 203.88 $ | 1000 | PTC04 TESTBENCH MAGNETIC |
| TRILED-TEST-BOX | Lumex Opto/C... | 0.0 $ | 1000 | LED TESTER BOX |
| ATAVRONE-TESTKIT | Microchip Te... | 28.27 $ | 1000 | AVRONE TESTKIT |
| DS1300/1500 TEST BOARD | Artesyn Embe... | 0.0 $ | 1000 | SHELF FOR DS1300/DS1500 P... |
| ADM6710F-TESTRL7 | Analog Devic... | 0.0 $ | 1000 | IC SUPERVISOR MPUSupervis... |
| ODL4U-TEST | Altech Corpo... | 1.51 $ | 1000 | DIN TERM SCREW 2 LEVEL OF... |
| TESD5V0V4UCX6 RFG | Taiwan Semic... | 0.06 $ | 18000 | TVS DIODE 5V 15V SOT26 |
| LED TESTER BOX | Lumex Opto/C... | 37.91 $ | 1000 | TEST BOX FOR LED |
| ETRX3USB-IHD-TEST | Silicon Labs | 70.25 $ | 1000 | USB STICK ZIGBEE SE1.1B R... |
| EARTH-TEST | Amprobe | 0.0 $ | 1000 | TELARIS SERIES EARTH RES ... |
| BQ27X00-TESTER | Texas Instru... | 0.0 $ | 1000 | TEST SYSTEM FOR BQ27X00 |
| TESD5V0V4UCU6 RFG | Taiwan Semic... | 0.08 $ | 3000 | TVS DIODE 5V 25V SOT363 |
| BQ2650X-TESTER | Texas Instru... | 111.36 $ | 1000 | SYSTEM TEST FOR BQ26500/B... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
TES 2N-0513 Datasheet/PDF