TGL41-6.8-E3/97

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS diodes are an important class of semiconductor devices which are widely used in electronic circuits for the protection of electronic components from electrical overstress caused by transient electrical surges. TGL41-6.8-E3/97 is a transient voltage suppressor diode, which is designed and manufactured for the purpose of protecting sensitive devices such as computer microprocessors from the harm induced by electrical transients.

TGL41-6.8-E3/97 is an unidirectional device that works by clamping the voltage at either the anode or cathode, depending on whether it is turned on by positive or negative transients. It has a breakdown voltage of 6.8V, with a stand-off voltage of 5.2V. It features a current rating of 400W peak pulse power (10/1000μs) and 40A peak pulse current (8/20μs). In addition, it has a surge reverse current intensity of up to 2A, and a capacitance of approximately 2.5pF.

The TGL41-6.8-E3/97 is primarily used in automotive electronics, computer peripherals, telecom equipment, and DSCs (Digital Signal Processing Chips). Its main application is to protect sensitive circuitry and components from transients and electrostatic discharge that can otherwise cause permanent damage or dysfunction. Its low capacitance and high surge reverse current rating allow it to be used in a wide range of applications.

The working principle of TGL41-6.8-E3/97 is based on the avalanche effect. When the voltage across the device exceeds its breakdown voltage, it starts to conduct and the current flowing through it can reach a high level. This high current charges the junction capacitance, which in turn causes an increase in the voltage. This further increases the current until the diode breaks down completely.

The TGL41-6.8-E3/97 is a unidirectional device, which means that it only conducts current in one direction. It has a reverse breakdown voltage of 6.8V and a forward standby voltage of 5.2V. The peak pulse power rating of this diode is 400W, and the peak pulse current rating is 40A. It features a low capacitance of 2.5pF and a surge reverse current rating of up to 2A.

In conclusion, the TGL41-6.8-E3/97 is a transient voltage suppressor diode designed and manufactured for the purpose of protecting sensitive electronic components from electrical transients and electrostatic discharge. It has a high surge reverse current rating, low capacitance, and a breakdown voltage of 6.8V. Its primary applications are in automotive electronics, computer peripherals, telecom equipment, and DSPs. Its working principle is based on the avalanche effect, which enables it to clamp the voltage at either the anode or cathode depending on whether the transient is positive or negative.

The specific data is subject to PDF, and the above content is for reference