THAS502M030AC1C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a type of electrochemical capacitor. They obtain their capacitance mainly from the oxide layer that is formed on a metal surface, mainly aluminum, as an anode. Compared to other types of capacitor components, electrolytic capacitors have much higher values of capacitance in a much smaller package. This is largely due to the double-layer construction of the electrolytic capacitors, as opposed to the single-layer construction of other capacitor technologies.

One of the best examples of aluminum electrolytic capacitors would be the THAS502M030AC1C. This particular aluminum electrolytic capacitor is a polarized capacitor with a capacitance of 0.03 microfarads (μF) and a voltage rating of 50 volts. It also has a long life expectancy of at least 2,000 hours. It is typically used in low current applications such as audio frequency filters, bypass circuits, and some power circuits.

The working principle behind the THAS502M030AC1C is relatively simple. It is a double-layer construction where one layer is made of aluminum and the other is made of an electrolytic solution. The anode of the capacitor is an aluminum plate with a very thin layer of oxide on it, which is formed when the device is manufactured. The oxide layer serves as an insulator and allows the charge to be transferred slowly between the anode and the electrolytic solution.

When voltage is applied to the capacitor, electrons travel towards the electrolyte. The electrolyte then undergoes an electrolytic reaction between the aluminum electrode and the electrolyte, which causes the electrons to be trapped and stored in the oxide layer. This stored charge is what gives the capacitor its capacitance.

The double-layer structure of the Aluminum Electrolytic Capacitors allows for a very high capacitance-to-volume ratio, which is larger than that of other types of capacitors. This makes them ideal for applications that require large amounts of capacitance in smaller spaces. Additionally, they have relatively low ESR ratings, meaning that the amount of current that can be safely pulled through them is quite high.

The aluminum electrolytic capacitor is a useful component for a wide variety of applications. It is important to keep in mind, however, that the anode must remain thicker than the oxide layer in order for the device to maintain its capacitance. If the oxide layer becomes too thick, the device will eventually fail and must be replaced in order to avoid damage.

The specific data is subject to PDF, and the above content is for reference