TISP4115M3AJR-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Thyristors) play an important role in a wide range of electrical applications. In this article, we explore the application field and working principle of TISP4115M3AJR-S, a popular TVS component.

A TVS component, short for transient voltage-suppression device, is an electrical component with the goal of limiting transient voltages and currents to protect connected circuits from damage. The TISP4115M3AJR-S is a diode type TVS, meaning it\'s a two-terminal semiconductor device with an anode and a cathode.

The TISP4115M3AJR-S is especially designed for applications where an increase in transient peak current is required such as driving loads such as relay coils, motors, solenoids, and lamps, which draws high inrush current. The component helps to limit the inrush current and lower the voltage across the load.

The component is also widely used for over-voltage protection in a range of consumer electronics, and for eliminating interference in data communication systems.

The working principle of the TISP4115M3AJR-S is relatively straightforward. The component is designed to limit transient voltage peaks by using special diodes and phase control technology. As an increase in voltage is detected, the device turns off and allows current to pass to the load. The component then redirects some of the current back into the circuit, thus regulating the voltage and protecting the associated circuit from damage. In this way, the component works to ensure that the voltage across the load stays within a certain range.

The TISP4115M3AJR-S device is designed to operate up to a peak of 4 volts at 600 watts. It has a fast response time and is rated to handle peak currents of 1000 amperes. The device is rated to 25.5 volts with a voltage clamping of 17 volts for standard lead-free device and 17.07 volts for compliant lead-free device.

In summary, the TISP4115M3AJR-S is a two-terminal diode type TVS component that is designed for applications such as over-voltage protection and limiting transient voltage peaks. It is rated up to 600 watts and is capable of handling peak currents of up to 1000 amperes. Its fast response time and voltage clamping ratings ensure it can effectively protect circuits from damage.

The specific data is subject to PDF, and the above content is for reference