TISP7082F3DR-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are solid-state devices consisting of a four-layered semiconductor junction structure. They are capable of turning ON and OFF high-voltage and high-current loads. Thyristors are mainly used as switches, for rectification and as voltage regulators in various appliance and industrial applications. The TISP7082F3DR-S is a thyristor that is widely used in various applications.

The TISP7082F3DR-S thyristor has a reverse blocking voltage rating of up to 800 V, a gate trigger current of 3 mA and a continuous forward current rating of 700 mA; it is typically used in applications such as AC/DC power supplies, motor controls, UPS systems, and battery charging/discharging. The TISP7082F3DR-S is typically used to regulate the flow of both AC and DC current. Additionally, it is used as a protective switch in power supplies to turn off the power supply in the case of a short circuit.

The TISP7082F3DR-S thyristor has a thyristor-type design, which means it has two states: normally on, when the thyristor is conducting and allowing current to pass through, and normally off, when the thyristor is not conducting and blocking the flow of current. To turn on the thyristor, a current pulse is applied to the gate pin, causing the thyristor to become conductive. Conversely, to turn off the thyristor, the current pulse is removed and the thyristor will become non-conductive. This makes it an ideal device for controlling high-current and high-voltage loads.

The TISP7082F3DR-S thyristor can also be used in combination with a driver circuit to further control the output current. The driver circuit helps to keep the gate voltage at a constant level and can provide a means of regulating the output current of the thyristor. This is important for controlling the power delivered to a load, such as a motor or heater.

In summary, the TISP7082F3DR-S is a wide-ranging and compact thyristor with a reverse blocking voltage of up to 800 V and is suitable for AC/DC power supplies, motor controls, UPS systems and battery charging/discharging. The TISP7082F3DR-S can be used to regulate both AC and DC current and when connected to a driver circuit it can provide further control over the output current. It is a reliable and cost-effective choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference