TISP7180H3SL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors (Thyristor Surge Suppressors) or TVS devices, are designed to protect circuits against transient voltage spikes and current flows. The TISP7180H3SL is a triple-channel transient voltage suppressor designed for signal line protection and switching applications. The device is designed to provide high surge current capability and excellent clamping performance. It is designed to protect sensitive electronic equipment from the effects of electrical interference or noise sources which can cause loss of important data or system failure.

The TISP7180H3SL provides three independent working channels, each channel support a peak current of 40A and ESD protection up to 8kV. It also provides surge clamping up to 30A when the voltage exceeds 14V. The peak pulse current between the channels can be up to 25A. The operating temperature range of the device is from -55°C to 150°C. The TISP7180H3SL is available in a package size of 5.4mm x 5.4mm x 1.5mm.

The TISP7180H3SL has an operating voltage of 14V and an off, or non-conducting, voltage of -5V. The device is designed to shut down any current flow when the voltage exceeds the set off voltage level. As the voltage drops below the set off voltage level, the device will then reset and begin to conduct any current flow again. The device provides protection from electrostatic discharge up to 8kV and will shut down any current spikes above 40A. As well as providing surge protection, the device can also be used to switch circuits on or off in response to voltage levels.

The TISP7180H3SL offers a wide range of applications for protecting circuits against damage and disruption caused by spikes in voltage or current. It is typically used in automotive, consumer electronics, medical, communication, and industrial applications to protect electronic components and systems from transient voltage surge caused by load dump, static electricity, edge rate sensitive load switches, EMI and power cross. It is also used in equipment and systems where voltage level switching or current limiting is needed.

The TISP7180H3SL offers an integrated quick response current limiting and overvoltage protection. It works by using the holding current (Ih) to control the on/off states of the device. Once the voltage reaches the set off voltage level, the device will turn off, limiting the current until the voltage is reduced and the device resets. This feature allows the device to provide protection from damage caused by overvoltage and current changes.

The TISP7180H3SL is an ideal device for surge protection and voltage level switching and current limiting applications. Its small size and excellent surge current capability make it an excellent choice for a variety of applications. It is designed to protect sensitive electronics from the effects of EMI and power cross, as well as providing protection from load dump, static electricity, and edge rate sensitive load switches. It is a reliable choice for providing excellent protection from electrical interference and current flows.

The specific data is subject to PDF, and the above content is for reference