TL084CDR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL084CDR Application Field and Working Principle

The TL084CDR is a dual operational amplifier JFET (Junction Field-Effect Transistor) chip produced by Texas Instruments. It is part of their Linear – Amplifiers – Instrumentation, OP Amps, Buffer Amps. It is composed of two operational amplifiers (op amps) with different gains and response time. The main features of the TL084CDR are: low noise, high input impedance, low power consumption, high output voltage swing and high common-mode rejection ratio.

The TL084CDR is mainly used in signal processing applications, such as audio preamps, instrumentation amplifiers, active filters, etc. It is also used in medical imaging and biometric applications. The TL084CDR is widely used because of its low operating voltage range, high performance and low noise, along with a high input impedance and low power consumption. It is also relatively inexpensive compared to other op amps.

The TL084CDR has an input voltage range of -18 volts to +18 volts, with a maximum output voltage swing up to +15 volts. It has a typical power consumption of 500 milliwatts and a typical operating temperature of -40 to +85 degrees Celsius. The TL084CDR is also available in 3-pin and 5-pin packages.

The TL084CDR is a dual-input, dual-output (DIDO) op amp. The two inputs are connected through a common-mode feedback line with a resistor. The resistor’s value is used to determine the gain (or sensitivity). The gain of the circuit is controlled by varying the resistor’s value.

The output of the TL084CDR is DC coupled. This means the output voltage is not affected by the reference voltage. The TL084CDR does not require external compensation, which makes the amplifier very easy to use. The output impedance is low, around 10 ohms. This makes it suitable for low-noise applications in which low-level output signals need to be amplified.

The TL084CDR has a very good noise performance, with a typical input-referred voltage noise of 200 nanovolts. This low noise gives the TL084CDR excellent performance in low-level signals. It also has a high input impedance, around 100 Megaohms, which ensures that high frequency signals are adequately amplified.

The TL084CDR has a high common-mode rejection ratio (CMRR), typically 80dB. This is important for accurate operation in mixed-signal systems, ensuring that the noise and interference from other signals is not affecting the performance of the amplifier. The CMRR also provides a stable amplifier over the supply voltage range.

The TL084CDR is a versatile and reliable operational amplifier. It is designed primarily for low noise applications, and is capable of creating high precision signal processing circuitry. Its low-power consumption, small size and good noise characteristics make it suitable for a wide range of applications. It is also relatively inexpensive compared to other op amps, making it a very cost-effective choice.

The specific data is subject to PDF, and the above content is for reference