TL3116CD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL3116CD is a voltage comparator circuit, built using CMOS technology. It is one of the most advanced linear-comparators, and is suitable for applications where wide range and low power operation is required. The TL3116CD is designed to work in a wide range of applications, including voltage and frequency protection, voltage monitoring, and data protection. The circuit is optimized for wide range and low power operation, with a minimum supply voltage range of 1V to 20V, and a maximum power dissipation of 1W.

The TL3116CD is the latest in a line of linear-comparators, most of which are based on CMOS technology. This makes them particularly attractive for applications that require low-power operation. The TL3116CD has two voltage inputs, a +V (positive) and a –V (negative) which can be used to compare the two voltages. It also has two output terminals, an output high (OC or +OV) and an output low (OD or -OV). If the voltage at the +V terminal is higher than the voltage at the –V terminal, then the OC output will go high; if the voltage at the +V terminal is lower than the voltage at the –V terminal, then the OD output will go low.

The TL3116CD is an advanced circuit, designed to offer improved performance compared to traditional linear-comparators. It has a wide voltage range, from 1V to 20V, and a maximum power consumption of only 1W. The circuit also has a low input bias current, which helps to reduce the power consumption even further. The circuit features low voltage and current offsets, which results in accurate comparison and measurement. In addition, it has good protection against ESD and EMI.

The TL3116CD has a standard gate structure, which consists of two N-type and two P-type MOSFETs. The two N-type MOSFETs operate in an ‘open-drain’ configuration, while the two P-type MOSFETs operate in a ‘push-pull’ configuration. When the voltages at the +V and –V terminals are equal, the circuit is said to be in ‘tri-state’, with both outputs (OC and OD) being in a high impedance state. When the voltage at the +V terminal is greater than the voltage at the –V terminal, the OC output is forced high, while the OD output is forced low. In this way, voltage comparisons are made and the appropriate outputs are generated.

The TL3116CD can be used in a variety of applications such as voltage monitoring, power supply regulation, temperature control and alarm systems. It is also suitable for data protection applications, since its low-power operation ensures that the circuit does not draw too much current from the battery. The TL3116CD is an excellent choice for any application that requires low-power operation and wide voltage range.

The specific data is subject to PDF, and the above content is for reference