TLC2274AQDRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

The TLC2274AQDRG4 is a quad operational amplifier (op amp) with ultra-low noise and low power consumption specifications. It has four single-pole/double-throw (SPDT) switches to select either the inverting or non-inverting circuits, thus allowing the user to quickly select and configure combinations of input impedance, output power and signal path.

Built on bipolar complementary-metal oxide-semiconductor (CMOS) process technology, these devices are notably lower power than traditional op amps and are well suited for applications requiring high signal-to-noise ratio (SNR) or a miniature form factor. With a low supply voltage of 2.7 V to 6 V, these op amps are optimized to work in conditions where power consumption is critical. TLC2274AQDRG4 also feature a wide common-mode input range and can operate at temperatures as high as 125°C, making them an excellent choice for Industrial applications.

The main application field of the the TLC2274AQDRG4 is instrumentation and signal processing amplifiers. The op amps enable differential signals to be amplified without affecting their original wide range: their wide common-mode input range makes them ideal for signal processing amplifiers.

The TLC2274AQDRG4’s architecture combines input noise reduction with a dedicated current source. This architecture results in outstanding performance for the input noise voltage and current, as well as high common-mode rejection and a high power supply rejection ratio. In order to minimize noise, these op amp can operate with supply voltages down to 2.7 V with a typical power dissipation of only 0.5 mA.

The TLC2274AQDRG4 are also suitable used in buffer amplifiers applications. Buffer amplifiers are useful in situations where the output must remain within a specified voltage range. This range is generally determined by the op amp input stage. It allows us to adjust the power delivered to the output stage in order to achieve a desired level of amplification or signal compensation. The TLC2274AQDRG4’s efficient power consumption and low noise makes it an ideal choice for buffer amplifier applications.

The TLC2274AQDRG4’s op amp systems can be configured as inverting amplifiers, non-inverting amplifiers and any other mode such as high-pass, low-pass, peak detector and DCamplifiers, etc. In inverting amplifier circuit topology, the output voltage is 180 degress out of phase with respect to the input voltage. Inverting amplifiers are simple to use and can be easily designed but their output voltages may not be linear with input, thus making them unsuitable for linear applications.

The non-inverting amplifier topology is similar to the inverting topology, but with the output voltage in phase with the input voltage. This type of amplifier circuit is used when a linear output voltage is required. The TLC2274AQDRG4 has four SPDT switches that facilitate easy selection of either the inverting or non-inverting circuit.

In summary, the TLC2274AQDRG4 op amp is a low power device that is suitable for use in instrumentation and signal processing applications. Because of its low power consumption, wide common mode input range and four SPDT switches, it is an excellent choice for low power applications such as buffer amplifiers. The TLC2274AQDRG4 is suitable for a variety of topology configurations, including inverting and non-inverting amplifier circuits.

The specific data is subject to PDF, and the above content is for reference