TLC27L7CDRG4

Voltage - Input Offset:	190µV
Base Part Number:	TLC27L7
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply, Single/Dual (±):	3 V ~ 16 V, ±1.5 V ~ 8 V
Current - Output / Channel:	30mA
Current - Supply:	29µA
Series:	LinCMOS™
Current - Input Bias:	0.7pA
Gain Bandwidth Product:	110kHz
Slew Rate:	0.05 V/µs
Output Type:	--
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear-Amplifiers-Instrumentation, OP Amps, Buffer Amps

The TLC27L7CDRG4 is a dual, low-noise CMOS operational amplifier with rail-to-rail output. It offers low-noise and low-distortion performance and excellent low-power features in a tiny 4-pin SOT-23 package. This high performance dual op amp has a wide supply voltage range and can operate from 2.95V up to 18V, making it suitable for many applications, including instrumentation and medical electronics. In addition, its low 0.1 μA typical supply current makes it an ideal choice for battery-powered systems.The TLC27L7CDRG4 is a high-performance dual CMOS op amp that is designed for general-purpose amplification and signal-conditioning applications. It features a wide input common-mode voltage range, low input bias current, high output current drive capability, rail-to-rail output swing, and wide power supply range. The TLC27L7CDRG4 also features excellent input offset voltage and input offset current characteristics that make it ideal for use in instrumentation and medical electronics applications.The TLC27L7CDRG4 op amp has a wide range of operating characteristics that make it suitable for use in a variety of applications. It has a low-noise performance of 4 nV/rtHz, a gain-bandwidth product of 10 MHz, and a slew rate of 0.6 V/μs. It has an open-loop gain of 1000 V/mV and a high output current driving capability of 25 mA. The high supply voltage range and low supply current of the TLC27L7CDRG4 make it ideal for use in battery-powered systems.In addition to its superior performance, the TLC27L7CDRG4 is also very easy to use. It has a pin configuration that makes it easy to connect and use in a variety of applications. The op amp has two pins for supplying power and two pins for connecting signals. The supply pins connect to a Vcc and ground while the signal pins connect to an input and output. The TLC27L7CDRG4 is designed to have a high common-mode rejection ratio, meaning that it is proficient at rejecting signals that are common to both of the op amp’s inputs. This makes it useful for applications that require high common-mode rejection.The working principle of the TLC27L7CDRG4 is straightforward. The op amp amplifies the difference between the two inputs, producing a voltage difference between the outputs that is proportional to the difference between the input voltages. The op amp typically has a gain of 1000 V/mV, meaning that for every 1 mV difference in the inputs, the output voltages will differ by 1000 mV. The TLC27L7CDRG4 also has a rail-to-rail output swing, meaning that the output voltages of the amplifier can swing between the positive and negative rails of the power supply, depending on the difference between the input voltages.In conclusion, the TLC27L7CDRG4 is a high-performance dual CMOS op amp that is designed for general-purpose, low-noise amplification and signal-conditioning applications. It is ideal for use in instrumentation and medical electronics, due to its high open-loop gain, low input bias current, rail-to-rail output swing, and wide power supply range. In addition, its low 0.1 μA typical supply current makes it an ideal choice for battery-powered systems. The working principle of the TLC27L7CDRG4 is straightforward, and its easy-to-use pin configuration makes it a suitable choice for many different applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description