TLE9251VSJXUMA1 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLE9251VSJXUMA1 is a highly integrated 3-phase automotive gate driver IC that contains two independent high-side and two independent low-side gate driver channels. It is designed to drive high current N-channel MOSFETs or IGBTs in a 3-phase bridge configuration such as half-bridge and H-bridge circuits. This IC provides a cost-efficient solution for controlling 3-phase motors like BLDC, PMSM, ACIM and recently it has also been used in inverters for photovoltaic applications. This IC can be categorized under interface -drivers, receivers, transceivers.

The key features of this IC include three-phase direct gate drive and half-bridge control, auto-restart and short current protection, 5V and 12V supply voltage range, and fault status flag detecting. It also includes an active Miller clamp, independent current limiting resistors and resistor calibration capability.

The TLE9251VSJXUMA1 IC works on the concept of three-phase direct gate drive and half-bridge control. It contains two half-bridges for each of the low-side and high-side gate drivers. Each half-bridge contains two power MOSFETs that are connected in a conventional half-bridge configuration. The high side and low side MOSFETs of the respective half bridges are driven by the integrated terminals with open drain outputs. A special dead time logic is present in the IC which helps in controlling the turn-on and turn-off of the MOSFETs in order to eliminate the cross conduction phenomenon.

The output stage of this IC consists of two differential, low impedance outputs. The low impedance output stage allows direct driving of the gate of the power MOSFETs. It also contains two 5V and 12V outputs, with low current consumption and high output drive current.

The TLE9251VSJXUMA1 IC contains two high-side and two low-side current sensing pins that allow the current through the driven MOSFETs to be monitored accurately. This helps in detecting a motor fault condition such as low motor current or over-current. It also contains an active Miller clamp which helps in preventing dV/dt voltage transients from occurring in high inductive loads.

The TLE9251VSJXUMA1 IC also contains several diagnostics and protection features that help in safe operation of the system. This IC contains a fault status flag detecting circuitry that helps in detecting over-temperature, over-voltage and open load conditions. It also contains an auto-restart protection feature which helps in restarting the system after a fault condition has been detected. It also has short current protection feature which helps in limiting the maximum current through the driven MOSFETs.

The TLE9251VSJXUMA1 IC has a wide range of application fields due to its versatile features. It can be used to control a variety of low-power to medium-power 3-phase motors such as brushless DC (BLDC), permanent-magnet synchronous motors (PMSM),and asynchronous induction motors (ACIM). It is also used in photovoltaic inverters to drive the high power switches of the power inverter.

In conclusion, the TLE9251VSJXUMA1 IC offers a cost-effective, versatile solution for 3-phase motor control applications. It contains a sophisticated gate drive circuitry, current sensing, fault detection, and protection features that increase reliability, reduce design time, and reduce cost. It can be categorized under interface -drivers, receivers, transceivers.

The specific data is subject to PDF, and the above content is for reference