TLP2098(TPL,F)

Series:	--
Part Status:	Active
Number of Channels:	1
Inputs - Side 1/Side 2:	1/0
Voltage - Isolation:	3750Vrms
Common Mode Transient Immunity (Min):	15kV/µs
Input Type:	AC, DC
Output Type:	Push-Pull, Totem Pole
Current - Output / Channel:	25mA
Data Rate:	5Mbps
Propagation Delay tpLH / tpHL (Max):	250ns, 250ns
Rise / Fall Time (Typ):	30ns, 30ns
Voltage - Forward (Vf) (Typ):	1.57V
Current - DC Forward (If) (Max):	20mA
Voltage - Supply:	3 V ~ 20 V
Operating Temperature:	-40°C ~ 100°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output

Optoisolators are a type of electronic component that provide an electrical isolation between two electrical circuits. The optoisolator separates the two circuits using an optical transmission medium, such as light-emitting diodes (LEDs). Optoisolators are commonly used in various applications to isolate circuits from one another.

TLP2098(TPL,F) Application Fields and Working Principles

The TLP2098(TPL,F) optoisolator is a generic logic optoisolator that can be used in a wide range of applications. The TLP2098(TPL,F) has a 5-pin configuration and a transient protection capability of 35V. It is designed to provide switching capability to logic systems, with current transfer ratios (CTR) up to 800%.The working principle of the TLP2098(TPL,F) is based on a phototransistor and a light emitting diode (LED). The LED is fed with a voltage of up to 24V, while the phototransistor is connected to the output signal. The LED emits a beam of light which is detected by the phototransistor. The phototransistor then switches the output signal to either a logic high or logic low, depending on the input signal.The TLP2098(TPL,F) optoisolator has several features including wide supply range, high output current, low operating current, good high frequency response, and low total harmonic distortion (THD). The device has a wide operating temperature range of -40℃ to 85℃ and is suitable for a variety of applications such as automotive, avionics, industrial systems, and consumer electronics.In terms of applications, the TLP2098(TPL,F) optoisolator can be used for signal conversion in motor control systems, logic signal conversion, interface circuits, and power and lighting circuits. It is also suitable for use in remote sensing and lamp control applications.

Conclusion

In conclusion, the TLP2098(TPL,F) optoisolator is a versatile optoisolator that can be used in a wide range of applications. It provides electrical isolation between two circuits and has various features that make it suitable for use in automotive, avionics, industrial, and consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description