TLP2631TP1F

Data Rate:	10MBd
Supplier Device Package:	8-SMD
Package / Case:	8-SMD, Gull Wing
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.65V
Rise / Fall Time (Typ):	30ns, 30ns
Propagation Delay tpLH / tpHL (Max):	75ns, 75ns
Series:	--
Current - Output / Channel:	16mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	1kV/µs
Voltage - Isolation:	2500Vrms
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components that are used to isolate signals from one circuit to another. The TLP2631TP1F is a logic output optoisolator which allows two circuits to be connected while providing signal isolation. This device is used in a variety of applications where signal isolation is required, including motor drives, power supplies, and signal switching.The TLP2631TP1F has a built-in infrared light-emitting diode (LED) and a phototransistor that are connected together by a light-transmitting medium. The LED transmits light to the phototransistor, which in turn activates the output transistor. The output transistor then carries the signal between the two circuits.The TLP2631TP1F is a 4-pin optocoupler that provides both input and output signals. The four pins on the device are labeled D, EG, S, and GND. The D pin is for the input signal, and the EG pin is for the output signal. The S pin is connected to the LED, and the GND pin grounds the device. When a voltage is applied to the D pin, the LED will be powered on and turns on the phototransistor which then causes the output transistor to be in the "on" state and provides the output signal.To connect the TLP2631TP1F, a voltage is first applied to the D pin, which powers on the LED. When an input signal is detected, the LED turns on and activates the phototransistor, which turns on the output transistor. The output transistor then carries the signal to the EG pin, which provides the output signal.The TLP2631TP1F is mainly used in motor drives, power supplies, and signal switching. In motor drives, it is used to provide a high-speed logic signal for controlling the motor. In power supplies, it helps protect sensitive devices from electrical noise caused by the power switch. In signal switching, it is used to ensure that the signal is isolated from the main circuit.The TLP2631TP1F also helps to prevent electrical noise generated by other devices from interfering with the signal. It is designed to provide high-speed switching capability and provide protection for both the input and output circuits.The TLP2631TP1F is a versatile optocoupler that can be used in a variety of applications. It provides signal isolation, high-speed switching, and protection from electrical noise. It is suitable for use in motor drives, power supplies, and signal switching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description