TLP2116(TP,F)

Data Rate:	15MBd
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Voltage - Supply:	4.5 V ~ 5.5 V
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.65V
Rise / Fall Time (Typ):	15ns, 15ns
Propagation Delay tpLH / tpHL (Max):	75ns, 75ns
Series:	--
Current - Output / Channel:	10mA
Output Type:	Push-Pull, Totem Pole
Input Type:	DC
Common Mode Transient Immunity (Min):	10kV/µs
Voltage - Isolation:	2500Vrms
Inputs - Side 1/Side 2:	2/0
Number of Channels:	2
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Optoisolators are a type of electrical component that uses a light-emitting diode (LED) to control the flow of electricity between an input and an output. The optoisolator can be used in a variety of electrical applications including switching, circuit protection, signal transmission, and current sensing. The TLP2116 (TP,F) is a specific type of optoisolator that falls under the category of optoisolators with logic output. This article will discuss the application field and working principle of the TLP2116 (TP,F) optoisolator.

Overview

The TLP2116 (TP,F) a two-output, optically-coupled solid-state device that combines a TLP281(F) phototriac and two side-walled optically coupled triacs. It is designed to provide low on-state voltage drop, high efficiency, and fast switching capabilities and offers an output voltage of up to 400 V. In addition, it features a non-zero cross talk that increases the off-state isolation voltage, and an on-state voltage drop of less than 1.2 V. It has a dielectric strength of 5 kVrms, UVLO and latch protection, and a maximum noise immunity level.

Application Field

The TLP2116 (TP,F) can be used in a variety of applications such as motor control, lighting/appliance control, and power switching. It is a versatile optoisolator that can be used for applications with both AC and DC control inputs. This optoisolator is designed to provide both low-voltage and high-power switching, making it suitable for a wide range of applications.

Working Principle

The working principle of the TLP2116 is based on the phototriac. A phototriac is an optically-controlled solid-state switching device that is triggered by a light source. The phototriac primarily consists of a pair of triacs with an LED embedded between them. When the LED receives light energy, it sends a triggering signal to the triac, prompting it to switch on or off. This principle establishes an electrical connection between the input and output, allowing the current to flow freely.In the case of the TLP2116 (TP,F) optoisolator, it consists of a TLP281(F) phototriac and two side-walled optically coupled triacs that are attached to one another by an insulated frame. This configuration allows the device to provide output signals with modulation rates up to 12 kHz, large pulse currents, and an output voltage of up to 400V.

Conclusion

The TLP2116 (TP,F) optoisolator is a versatile and reliable optically coupled switch that can be used in a variety of applications. Its working principle is based on phototriac technology, and it provides output signals with modulation rates up to 12 kHz, large pulse currents, and an output voltage of up to 400V. Consequently, it can be effectively used for applications like motor control, lighting/appliance control, and power switching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description