TLP2408(F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optically isolated components, are a type of components used for electrical/optical or optical/optical isolation. In this context, the term “optically isolated component” usually refers to components that use light-emitting diodes (LEDs) or laser diodes as their optical component. This type of component is used to provide isolation between two circuits. One of the most common optically isolated components is the TLP2408(F).

The TLP2408(F) consists of an LED amplifier optically-isolated by a dual transfer gate unit. It is a dual-channel logic-level output optocoupler, featuring an AC or DC control output terminal and an open-collector output terminal. The TLP2408(F) is a low-cost optically isolated component suitable for various zero-cross control circuits. This component offers high common-mode isolation voltage of up to 4500Vrms, high insulation resistance, low drive current, and low on-state resistance.

The primary application of the TLP2408(F) is in logic circuits, where it is used to provide electrical isolation between two circuits. It can be used as a buffer, as a signal conditioner, or as a voltage-level latch. One of the most common uses of the TLP2408(F) is in motor control circuits. In this application, the TLP2408(F) is used to isolate the control voltage from the motor power supply, thus providing a more reliable and accurate control of the motor speed. Other applications include interrupt controllers, power supplies, and power converters.

The working principle of the TLP2408(F) consists of using the light-emitting diodes (LEDs) to convert the control signals into optical signals. The optically-isolated transfer gate unit then converts the optical signal into electrical signals, which are then amplified by a dual transistor array. This amplification process increases the output from the low input voltage to the required voltage, allowing the output to control the higher voltages of the motor control circuit.

In summary, the TLP2408(F) optically-isolated component is a low-cost and high-performance component suitable for various zero-cross control circuits. It is primarily used in logic circuits, motor control circuits, interrupt controllers, power supplies, and power converters. Its working principle involves the use of light-emitting diodes (LEDs) to convert the control signals into optical signals and then the optically-isolated transfer gate unit to convert the optical signal into electrical signals, which are then amplified by a dual transistor array.

The specific data is subject to PDF, and the above content is for reference