TLP2601(F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of electronic component used to transmit electrical signals between two isolated circuits by using light as the medium of communication. The TLP2601(F) is a type of optoisolator with logic output and is used in various applications. This article will discuss the application field and working principle of the TLP2601(F).

Application Field

The TLP2601(F) optoisolator with logic output is most commonly used in logic isolator applications. It is also used in motor control and power supply circuits. The TLP2601(F) is particularly suited for these applications since its package is small and it has a high switching speed. The TLP2601(F) optoisolator includes an LED (light-emitting diode) coupled to a NPN phototransistor with off-state leakage current of 8μA maximum. It provides a 6kV ESD protection, operates over a wide temperature range of -55 to +125℃ and can withstand a reverse voltage up to 6V.

Working Principle

The working principle of the TLP2601(F) optoisolator is based on the principle of light isolation. When the LED is switched on, it emits a light beam which is picked up by a photosensitive detector. This detector produces an electrical signal that can be used to control other electronic circuits. The LED and detector can be optically and electrically isolated from each other. This ensures that there is no electrical connection between the circuits since the light serves as an insulating barrier.

The TLP2601(F) optoisolator has two pins, an input pin and an output pin. When the input voltage is applied to the input pin, the LED is switched on, and a signal is generated at the output pin. The magnitude of the output signal is proportional to the magnitude of the input voltage. The TLP2601(F) optoisolator has a threshold voltage of 1.5V, which means that the output signal is generated only when the input voltage is greater than 1.5V.

The logic output of the TLP2601(F) optoisolator can be configured as either a high or low level. When the logic output is set as a high level, the output voltage is 5V when the input voltage is above 1.5V. When the logic output is set as a low level, the output voltage is 0V when the input voltage is above 1.5V. The switching speed of the TLP2601(F) optoisolator is 10μs, which means it can switch between high and low levels quickly.

Conclusion

In conclusion, the TLP2601(F) optoisolator with logic output can be used in various applications where logic isolation and fast switching speed are the primary requirements. This optoisolator includes an LED coupled to an NPN phototransistor and has a threshold voltage of 1.5V. It has two pins, an input pin and an output pin. The logic output of the TLP2601(F) can be configured as either a high or low level and has a switching speed of 10μs.

The specific data is subject to PDF, and the above content is for reference