TLP290(E)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of galvo-shielded coupler that uses a light-sensitive electrical component to isolate two circuits while ensuring signal integrity. The TLP290(E) optoisolator is a photovoltaic (PV) output transistor type optoisolator that uses a high photocurrent LED emitter to drive a photosensitive FET-threshold silicon phototransistor. It is the most common type of optoisolator, commonly used for a wide range of applications where signal isolation between separate circuits is necessary.

The TLP290(E) primary electrical component used for its operation is an ultra-small LED (light-emitting-diode). The LED is very small and electrical energy is used to create a photonic field in its vicinity. This field is separate from the surrounding electrical circuit and totally isolated. In this sense, the LED emits very low-intensity light generated by low-current electrical activity. The light energy emitted is absorbed by a photosensitive chip, usually a FET (field effect transistor) or a phototransistor, which then changes its electrical state.

The light generated by the LED in the TLP290(E) optoisolator is used to drive a photosensitive FET-threshold silicon phototransistor. The phototransistor then acts as a buffer, allowing signals to pass between the two circuits while isolating them electrically. The device operates in the sensitive photovoltaic (PV) output transistor mode, in which the current output of the phototransistor is voltage controlled.

The output of the TLP290(E) optoisolator is voltage controlled, which means that the output current is directly proportional to the input voltage applied to it. The device requires an input voltage from 1.8V to 3.6V, and can provide an output current of up to 1A. The device also has excellent speed performance, with a rise/fall time of less than 10ns. The device has an excellent signal isolation rating, with a very low inter-circuit leakage current of less than 1nA.

The TLP290(E) optoisolator can be used in a variety of applications, especially where signal isolation between two different circuits is required. It can be used as an isolation device in digital and analog circuits, as an interface translator for embedded systems, and as an instrumentation amplifier. It can also be used as a current regulator in power supplies, as a current controller in motor and motor-drive systems, and as a switch in light control systems. In addition, the device is widely used in automotive control systems, telecom networks, and robotics.

The TLP290(E) optoisolator is easy to use, reliable, and cost effective. It is a great solution for a variety of applications where signal isolation between two different circuits is required. With its high photocurrent LED emitter, photosensitive FET-threshold silicon phototransistor, and excellent signal isolation rating, it is an ideal choice for anyone looking for a high performance optoisolator.

The specific data is subject to PDF, and the above content is for reference