TLP3062(S,C,F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLP3062 is an optoisolator that uses a triac, a type of thyristor, for its output device. It is used for controlling current and voltage in a wide range of applications including digital logic, power and inverter circuits. The TLP3062 offers isolation and protection from high voltage, high current transients, and can also be used in motor speed and dim control circuits. The device also includes overload protection and is available in both through-hole and surface mount packages.

The optoisolator consists of a gallium arsenide infrared light-emitting diode (LED) and a light-sensitive silicon photovoltaic triac connected in opposite directions. When the LED is forward-biased, it emits an infrared light that is received by the photovoltaic triac, which in turn triggers the turn-on of the triac. The TLP3062 optoisolator has a maximum operating voltage of 30 V and an insulation voltage of 5.5 kVrms. It also has a maximum collector current of 1 A and a maximum LED current of 30mA.

The TLP3062 can be used for controlling the current and voltage of an AC load, either by using a thyristor based phase control technique or a Triac based phase control technique. When used in a phase control circuit, the LED is forward biased for a portion of the forward half-cycle of the AC line input. This fires the triac and current flows through the load until the next zero crossover point. This technique can be used to turn a device on and off at a set frequency and is often used to control fan speed or dim lights.

Another application for the TLP3062 is an overvoltage protection circuit. This circuit uses the TLP3062 for driving a silicon controlled rectifier (SCR) in series with the load. The SCR is triggered by the TLP3062 when the input voltage exceeds a predefined threshold. The SCR then clamps the output voltage at the threshold level, protecting the load from overvoltage.

In an inverter application, the TLP3062 can be used to drive a series of SCRs. When the LED is forward biased, the triac turns on, and current flows through the SCRs in sequence, creating alternating current (AC) output. This AC output can then be used to drive a motor or other load.

In sum, the TLP3062 is an optoisolator with very versatile applications for controlling current and voltage in AC circuits. It features good insulation, overload protection, and can be used in inverter, phase control, and overvoltage protection circuits. It is available in both through-hole and surface mount packages and is suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference