TLP525G-2(F)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are widely used in applications where electrical isolation between two circuits is required. The TLP525G-2(F) is a type of optoisolator specifically designed with Triac, SCR Output. It is ideal for applications requiring electrical isolation and solid-state switching.

The spectral response of TLP525G-2(F) is relatively wide, allowing it to be used in a variety of applications. The device operates in a wide range of frequencies, from DC through 1 MHz, and can be used in modulating, pulse-width modulation, and light-activated switching circuits. Its minimum input current and output current requirements ensure efficient and reliable operation.

TLP525G-2(F) also utilizes a low-speed switching technology, allowing it to switch on and off quickly while providing accurate control of the switching output. In addition, the device utilizes a TRIAC load switch that allows it to quickly turn on and off an AC load without using a manual switch. This feature makes it an ideal device for low voltage AC/DC applications.

The working principle of TLP525G-2(F) optoisolator is based on the use of an LED as part of the optical coupler. When the input side of the optoisolator is switched on, the LED sends out a light signal. This light signal is sent along an optical path to the photo coupler component on the output side of the device. The photodiode within the coupler then converts the light signal into an electric current, which passes thru the SCR and then to the Triac switch. Depending on the configuration of the optoisolator, the switching action will either open or close the Triac.

The primary applications of the TLP525G-2(F) optoisolator include AC/DC applications, high-side drivers, motor controls, and relay configurations. It can be used in controlling motor speed, dimming lights, and controlling power in other AC circuits. This device can also be used in safety-related applications where electrical isolation is required.

The exact specifications and tolerances for the TLP525G-2(F) will vary depending on the vendor. However, the overall specifications are similar across vendors, with a required minimum input voltage of 2V, a maximum input voltage of 15V, and a maximum output current of 1.0A. It should also be noted that these devices are RoHS compliant.

The TLP525G-2(F) optoisolator is a reliable and versatile device that can be used in a variety of applications. Its wide spectral response and low-speed switching capabilities make it ideal for controlling AC and low-voltage DC applications. Due to its small size and low power requirements, this device is also a great solution for safety-related applications where electrical isolation is required.

The specific data is subject to PDF, and the above content is for reference