TLP620-2(GBTP1,F,T)

Current - DC Forward (If) (Max):	50mA
Vce Saturation (Max):	400mV
Operating Temperature:	-55°C ~ 100°C
Mounting Type:	Surface Mount
Package / Case:	8-SMD, Gull Wing
Supplier Device Package:	8-SMD
Series:	--
Packaging:	Cut Tape (CT)
Part Status:	Discontinued at Digi-Key
Number of Channels:	2
Voltage - Isolation:	5000Vrms
Current Transfer Ratio (Min):	100% @ 5mA
Current Transfer Ratio (Max):	600% @ 5mA
Turn On / Turn Off Time (Typ):	3µs, 3µs
Rise / Fall Time (Typ):	2µs, 3µs
Input Type:	AC, DC
Output Type:	Transistor
Voltage - Output (Max):	55V
Current - Output / Channel:	50mA
Voltage - Forward (Vf) (Typ):	1.15V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic OutputOptoisolators are electronic components that use optical isolation to prevent electrical signals from contaminating an electrical system. They are commonly used as safety barriers between two parts of an electrical design and are especially useful in applications where a circuit component has input and output components that need to be electrically isolated from each other. The most common type of optoisolator is the transistor–photovoltaic output (GBTP) type, which combines a semiconductor light-emitting diode (LED) and a phototransistor.One particular type of GBTP optoisolator is the TLP620-2. This component has a wide range of applications, such as switching, pulse generators, protection circuits, logic circuits, signal delay circuits, and various sensor interfaces. The TLP620-2 is a relatively inexpensive, low-power components that can typically run from 5 Volts.The TLP620-2 has a forward voltage of 1.2V and a Vceo of 4.0V, which makes it suitable for powering from a wide range of power sources. It is recommended for use in systems with low voltages and high current, such as those found in automotive and industrial applications. The component also has an ultra-low off-state current, making it great for use in power-sensitive applications.The working principle of a GBTP optoisolator is relatively straightforward. The LED is driven with a current source, which causes it to emit visible light. This light is reflected by the photodiode, which activates the phototransistor. Connected to the phototransistor is a resistor, which serves as a current limiting device and prevents the transistor from drawing too much current. This output transistor will then turn on and off in response to the light emitted by the LED, allowing two parts of an electrical system to be isolated from one another. This is especially useful in situations where two parts of a circuit are located in different physical locations and it would be difficult or impossible to wire them together directly.The TLP620-2 is also very compact, measuring just 0.4 inches by 0.375 inches. It is rated for up to 500 Volts of isolation and operates in temperatures up to 70°C. Its small size and wide operating temperature range make it suitable for use in a variety of applications, such as automotive, aerospace, and industrial control systems.In conclusion, the TLP620-2 optoisolator from Taro Lambertson is a reliable, affordable, and low power component that combines a semiconductor LED and a phototransistor into a single package. It is commonly used as a safety device and isolation barrier between two parts of a circuit. It has a wide range of uses, from switching and protection circuits to pulse generators and signal delay circuits. Its small size and wide operating temperature range make it suitable for use in a variety of applications, such as automotive, aerospace, and industrial control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description