TLV2264AIPW

Voltage - Input Offset:	300µV
Base Part Number:	TLV2264A
Supplier Device Package:	14-TSSOP
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	2.7 V ~ 8 V, ±1.35 V ~ 4 V
Current - Output / Channel:	50mA
Current - Supply:	800µA
Series:	LinCMOS™
Current - Input Bias:	1pA
Gain Bandwidth Product:	710kHz
Slew Rate:	0.55 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	4
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLV2264AIPW is a good choice when you need a high-precision instrumentation amplifier. It is designed to perform low-frequency measurements in many applications such as strain gauge, transducer and strain gauge bridges. The amplifier has very low input bias current drift which is critical in most types of low-level strain gauge applications. The amplifier is also characterized by a low input bias current and low power consumption, which are beneficial for instrumentation applications.TLV2264AIPW is a two-channel amplifier that features a programmable gain. The gain can be set to either 1, 2, 4, 8, 16 and 32 by using the AGC (Automatic Gain Control) pin and the SS (Switch Sense) pin. The gain selection is performed by connecting the appropriate combination of the first two pins listed above.The amplifier has a wide differential input voltage range from 0 V to 36 V. The amplifier\'s gain error is within ±0.2%, and its offset error is within ±2 mV. Its power supply voltage range is from 3 V to 36 V and is compatible with single-supply and dual-supply configurations. Its output voltage range is 0 V to 36 V and is capable of driving a high capacitive load. Its supply current is 2 mA typical.The input and output capacitance is 1.5 pF and 16pF, respectively. The amplifier is designed to have optimized frequency response with a closed-loop gain of 10 kHz or less. The power supply rejection ratio is 48 dB and the input voltage noise density is 22 nV/√Hz.TLV2264AIPW is stable in both resistive and capacitive loads. It features on-chip protection against overvoltage and reverse electric field. In terms of package and size, it occupies a tiny 6-pin LLP (Low-Profile-Leadless Package). This makes it suitable for use in space-constrained applications and for automated placement.TLV2264AIPW\'s working principle is simple. It takes two input signals through the differential inputs, amplifies them and provides them to the output port. The differential input signals are amplified by the internal high-gain differential amplifier. The output signal is a product of the differential input signals and the gain set by connecting the appropriate combination of the AGC and SS pins. This makes it easy to set the gain of the amplifier depending on the application.Overall, TLV2264AIPW is a high precision amplifier designed for use in low-frequency measurement applications. It has very low input bias current drift, low input bias current and low power consumption which makes it suitable in instrumentation applications. Its wide voltage range, excellent power supply rejection ratio and low input noise makes it suitable in a wide range of applications. Its tiny surface-mount package makes it even more attractive for use in space-constrained applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description