TLV2471QDRG4Q1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLV2471QDRG4Q1 is a dual low-noise, low-power operational amplifier (op amp) with an excellent CMRR. It is commonly used in instrumentation, buffering, and other linear applications. It has an output voltage range of up to ±18V and features a wide power supply range of +2.7V to +16V. This device also features a low noise floor of 20 nV/√Hz and a very high input impedance of 9 TΩ. This makes it an ideal choice for signal conditioning, pre-amplification, and buffer applications.

The TLV2471QDRG4Q1 is a unity-gain stable amplifier that provides low noise, low distortion, and low power consumption. It has a wide bandwidth of 200MHz and low input bias current of 250pA, making it suitable for both high-speed and low-power applications. Moreover, this device provides high common-mode rejection ratio (CMRR) of 83 dB at 0.1 kHz, reducing undesirable noise and crosstalk in signal transmission.

The TLV2471QDRG4Q1 has many advantages that make it an ideal choice for instrumentation, buffering, and other linear applications. Its high CMRR and bandwidth of 200 MHz allow it to accurately amplify weak or low-frequency signals while minimizing undesirable noise and distortion.The low power consumption of only 1 mW also ensures that it is suitable for long battery-powered applications.

The TLV2471QDRG4Q1’s operating principle is quite simple. It amplifies the difference between two input currents and provides a differential output voltage based on the difference between the input currents. It consists of a high-performance input stage with fully-differential differential signal paths. This leads to the high CMRR and low distortion values the device is able to provide. The device also uses an inverted cascode technique to increase its slew rate and reduce its circuit complexity.

In summary, the TLV2471QDRG4Q1 is an excellent choice for instrumentation, buffering, and other linear applications. It provides a wide range of input and output voltages, a high bandwidth of 200MHz, and low power consumption of only 1 mW. Moreover, the device has a high CMRR of 83dB and a low noise floor of 20 nV/√Hz, making it ideal for low-noise, pre-amplification, and buffering applications. Its inverted cascode technique and simple operating principle make it an economical and versatile choice, ideal for a variety of designs.

The specific data is subject to PDF, and the above content is for reference