TLV3702CDGKRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLV3702CDGKRG4 is a high-precision, fast-response comparator designed for applications in the linear-comparator family. It is designed with a push-pull output which can drive up to 4 mA and respond with a slew rate of around 0.1 V/μs. In addition, the TLV3702 can detect switching speed of 10V/μs, allowing it to be used in applications requiring fast response.

The linear-comparator family includes op-amps, differential-comparators and bridge-comparators. In linear-comparing applications, the TLV3702 can provide voltage differences between inputs over a range of ±10V. The comparator immediately switches analog output states when the difference between the inputs reaches a certain level. It can also detect inputs with a hysteresis range of 3mV.

In terms of supervisory applications, the TLV3702 is usually used as a part of a system. It monitors an input voltage against a fixed threshold, and when the voltage increases or decreases beyond the threshold, an output signal is generated. The output signal is then used to trigger a microcontroller or other controller to take suitable actions.

The TLV3702CDGKRG4 has a wide range of operating voltage, ranging from 2.5V to 18V, and can be used in a variety of applications. The device has low power consumption, with a quiescent current of 10μA and a maximum operating current of 4 mA. It is also possible to program it with an external voltage reference.

In terms of its working principle, the TLV3702CDGKRG4 is a high-precision precision-controlled voltage comparator. It compares two input voltages and produces a TTL voltage at its output upon detection of the threshold. A resistor-divider circuit (R1 and R2) can be used to set the trip level, while two identical resistors (R3 and R4) are used to provide the gain required by the comparator.

In summary, the TLV3702CDGKRG4 is a high-precision, fast-response comparator suitable for applications in the linear-comparator family. It is designed with a push-pull output capable of driving up to 4 mA and a slew rate of around 0.1 V/μs. Its operating voltage range is from 2.5V to 18V, with a quiescent current of 10μA and a maximum operating current of 4 mA. It can be used in a variety of applications and can be programmed with an external voltage reference for supervisory applications. This makes it ideal for applications requiring fast response.

The specific data is subject to PDF, and the above content is for reference